Where to find sprinkler drip line emitters?
When you looking for sprinkler drip line emitters, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable sprinkler drip line emitters is not an easy task. In this post, we show you how to find the right sprinkler drip line emitters along with our top-rated reviews. Please check out our suggestions to find the best sprinkler drip line emitters for you.
Best sprinkler drip line emitters
1. Axe Sickle Set of 50 Drip Emitters Perfect for 4mm / 7mm Tube, Adjustable 360 Degree Water Flow Drip Irrigation System for Watering System.
Feature
Attention: Water exit: Top Height of spike: 13cm / 5.1 inch Range:Adjustable spray distance from 0 to 20 inch;Irrigation angle: 360 degree Suitable for 4/7mm (Inner/Outer diameter) tube.Make sure the hose is softened before connecting. A firm push with a little added wiggling gets the hose on with sprinkler.you soak end of 1/4" tubing in VERY hot water before attaching to the dripper. I would recommend filling a thermos with boiling water to dip your 1/4" hose into as you assemble your lines. Be very careful you don't spill boiling water on yourself and wear gloves to handle the hot end.
Directs water exactly where you need it in a wide variety of planting areas Applies water similar to a spray head on an underground system.
Water flow can be adjustable Adjustable flow rate from 0 to 13 gallons-per-hour,Suitable for pots, tubs, ground cover, landscaped gardens and Etc...
Money Back Guarantee: Any quality question, just feel free to contact us, We will reply within 24 hours to resolve.,All Axe Sickle products are fulfilled by Amazon with 100% guarantee fast shipment and good customer service.
Description
Use this versatile staked 360 degree full circle pattern Micro-Bubbler (adjustable for flow, distance, and height) to apply water-saving drip irrigation in more places around your landscaping. Micro-Bubbler applies water similar to a spray head on an underground system projecting 8 streams of water in a full circle pattern. Easily directs water exactly where you need it in a wide variety of planting areas.2. Rain Bird CNV182EMS Drip Irrigation Sprinkler Conversion Kit, 1800 Series Pop-Up to 6 Drip Emitters with 1/4" Tubing
Feature
Kit converts a pop-up sprinkler spray head into a water-saving Drip emitter systemWaters flower beds, shrubs, and other garden plants with pinpoint accuracy
Greatly reduces weed growth by watering only where you want and need it
Includes retro-fit conversion head with pressure regulator, filter and 6-port manifold
Replaces Rain Bird 1800 series without digging; other styles of pop-up sprinkler heads with 1/2" bottom inlet will require digging
Reduces water use up to 40% compared to spray irrigation; requires capping other heads in zone
Description
Rain Bird CNV182EMS Drip Irrigation Sprinkler Conversion Kit, 1800 Series Pop-Up to 6 Drip Emitters with 1/4 Tubing. Kit converts underground sprinklers in landscaped areas to water-saving Drip irrigation emitters. Easily installed in minutes, this kit waters flower beds, shrubs, and more with pinpoint efficiency. All-in-one unit provides 30 PSI pressure regulation, and 200-mesh filter screen for optimal Drip system performance. Saving up to 40% over sprinkler watering, Drip systems apply water directly to the root zone for healthier, faster-growing plants, longer lasting blooms, and greener leaves. Since you won't be watering the surrounding soil, you'll also have fewer weeds to pull. In most instances, owners of Rain Bird 1800 Series pop-up sprinklers (#1 installed sprinkler head by professional installers) will make the conversion without digging. To install kit simply unscrew the old sprinkler head, screw on the retro fit head and manifold, attach tubing to manifold and cut to length. Insert chosen emitter into end of tubing; use stake to hold tubing and place near the root zone of your plants. Each retro-fit conversion head will replace pop-up sprinklers with a 1/2 threaded bottom inlet. Dig out old sprinkler and thread on retro-fit assembly; flush system to remove any debris before adding tubing or emitters. Each kit contains (1) pressure-compensating 6-outlet manifold, (1) 1800 retro-fit spray head with filter and pressure regulator, (1) 50 roll of 1/4 Drip distribution tubing; (6) stakes to hold tubing and direct the flow at each plant (3) 1.0 gallon per hour black emitters, (3) 2.0 gallon per hour red emitters. You can cap off any additional unused spray heads using Rain Birds model 1800CAPS (sold separately). Rain Bird The Intelligent Use of Water3. Toro 53640 Blue Stripe Drip 1/4-Inch Tubing Sprinkler with Emitters, 100-Feet
Feature
Dimensions = 250 od x 170 id1/2 gallon per hour (gph) emitters every 6-inch
Use as a drip hose to irrigate containers, gardens and flower beds
Description
The Toro Blue Stripe Drip 1/4-inch x 100-feet Tubing with Emitters is a professional-quality drip hose made of high-quality polyethylene.4. Rain Bird SSF70-50S Drip Irrigation Pressure Compensating 1/2" (.700 OD) Sub-Surface Emitter Tubing with Copper Shield Technology, 18" Emitter Spacing, 50' Roll, Copper
Feature
The perfect above or below ground Drip system for turf and non-turf applicationsPatented Copper Shield Technology protects emitters from root intrusion
Irrigates plants directly at their roots for 90% watering efficiency
Contains a 0.9 gallon per hour emitter every 18"
Pressure-compensating emitter technology waters all plants equally throughout the length of tubing
Ideal for organic gardens, turf grass, shrub and ground cover areas
Description
Rain Bird SSF70-50S Drip Irrigation Pressure Compensating 1/2" (.700 outside diameter) Sub-Surface Emitter Tubing with Copper Shield Technology, 18" Emitter Spacing, 50' Roll, Copper colored. Rain Bird's patented Copper Shield Technology prevents plant roots from growing into the Drip emitters in this unique copper-colored 1/2" Drip tubing. "The Copper-Color Outside Ensures that the Copper Shield is Inside!" Patent-pending Copper Shield Technology is the latest innovation in the Rain Bird Drip Irrigation family protecting emitters from root intrusion for a long-lasting maintenance free system. Sub-surface Drip tubing provides 90% watering efficiency by irrigating plants directly at their roots with low-pressure emitters. Rain Bird's patented emitter design uses a pressure-compensating diaphragm technology to water all plants equally throughout the length of tubing. The design avoids clogging by continuously flushing debris through an extra-wide turbulent flow path. The low-profile emitter reduces in-line pressure loss; allowing longer lateral runs to simplify system design and reduce installation time. The 50' roll of 1/2" tubing features an emitter every 18" with an output of 0.9 gallon-per-hour at an operating pressure of 8.5 to 60 psi. Rain Bird's copper colored dual-layered tubing (copper over black) provides unmatched durability and resistance to UV damage, chemicals and algae growth. A proprietary material blend provides industry leading flexibility allowing tighter turns with fewer elbows for fast and easy installation. Perfect for small, narrow and tight planting areas, as well as areas with tight curves or many switchbacks. Compact coiling method allows tubing to remain coiled as its extracted; making it easy to use, store and eliminates waste. Unique Micro-Porous design creates an ultra-tight connection; tubing expands over fittings then shrinks making it almost impossible to remove without cutting. The resulting seal is completely leak-proof and fittings wont pull out; just cut tubing to remove fittings and expand. Tubing accepts Rain Bird Easy Fit Compression, Barbed Insert and all other 17mm barbed insert fittings. Specifications: outside diameter 0.700", inside diameter 0.580", wall thickness 0.60". Operating pressure: 8.5 to 60 PSI. Flow rate: 0.9 GPH. Rain Bird "The Intelligent Use of Water"5. One Stop Outdoor (100-PACK) 0-10 GPH 360 Degree Adjustable Dripper - Barbed Connection - Drip Irrigation Emitter Sprinklers
Feature
PACK OF 100 Premium Quality Drip Irrigation 360 Degree Barb Emitters0-10 GPH - Wetting area: 0 to 2.7'
Can be extended with 1/4" micro tubing or connected into the 1/2" drip tubing or supply line
Rotation of the cap allows adjustment of flow and diameter of throw down to a complete shut-off via a ratchet mechanism on the cap and a notch on the base
Operating pressure range: 15 to 30 PSI Recommended operating pressure: 25 PSI
Description
360 and 180 Adjustable Stream Drip Emitters, combined with a 6" stake or 1/4" barb, are designed to produce a gentle stream pattern with an adjustable flow rate of 0 to 15.7 GPH and a diameter range of 0 to 2.7' at 30 PSI. Models B05B (pack of 5), B10B (pack of 10) and B25B (pack of 25) come with a 1/4" barb and produce a full-circle pattern with eight streams. Models BA1B (pack of 4), BA10B (pack of 10) and BA1PRO (pack of 25) also produce a full-circle pattern and come with a 6" stake. The half-circle models include B10C (pack of 10) with a 1/4" barb and BA5C (pack of 5) with a 6" stake. Each drip emitter has an adjustable cap that allows for simultaneous control of the flow rate and the wetting area. Useful in residential gardens for an individual plant or group of plants, inside planter boxes and small to large pots, or for groundcovers, shrubs and trees. Available in 360 and 180 patterns for individual plants or closely spaced plantings Recommended for planter boxes, large pots, groundcovers and shrubs Rotation of the cap allows adjustment of flow and diameter of throw down to a complete shut-off via a ratchet mechanism on the cap and a notch on the base. Can be extended with 1/4" micro tubing or connected into the 1/2" drip tubing or supply line Efficient and reliable method for applying water Trouble-free operation with no moving parts Low flow with gentle stream pattern Removable cap for easy cleaning Constructed of UV-resistant, durable plastic material Product specifications Operating pressure range: 15 to 30 PSI Recommended operating pressure: 25 PSI (use with model D46 25-PSI pressure regulator) Flow rate: 0 to 15.7 GPH with approximately 20 clicks Pattern: 360 and 180 Wetting area: 0 to 2.7' Mounting options: 6" stake or " barb Filter requirement: minimum of 120 mesh Recommended spacing: 2'6. UCLEVER Adjustable Irrigation Drippers Drip Emitters Barbed Connector 4mm/7mm Tube, 360 Degree Water Flow Drip Irrigation System, Pack of 50
Feature
Adjustable 360 Degree Full Circle Spray, Suitable for tube: Inner diameter 4mm, Outer diameter 7mm.Length 13.5cm/5.3", Spray distance from 0 to 20 inch. 50pcs Barbed Connector Included.
Directs water exactly where you need it in a wide variety of planting areas Applies water similar to a spray head on an underground system.
Adjustable water flow rate from 0 to 13 gallons-per-hour.
Suitable for lawn, garden, self plant, flower beds, vegetable gardens, herbs gardens watering, etc.
Description
Adjustable 360 Degree Water Flow Irrigation Drippers
Material: PE plastic
Length: 13.5cm/5.3inch
Spray distance from 0 to 20 inch
Suitable for lawn, garden, self plant, vegetable gardens, herbs gardens watering, mass plantings, ground cover, annual flower beds and containers, etc.
Package Included:
50 x Adjustable 360 Degree Irrigation Drippers
7. Rain Bird T22-250S Drip Irrigation 1/4" Blank Distribution Tubing, 250' Roll, Black
Feature
Rugged, flexible tubing that's easy to unroll and stake in garden, flower bed, ground cover or other landscaped areasUse as the main line in a small Drip irrigation system or to branch off from larger 1/2" Drip tubing to micro-watering devices
Textured finish improves handling; making connections faster and easier
Extra flexibility for kink-free installation, unmatched resistance to chemicals, algae growth and UV damage
Unique Micro-Porous design creates an ultra-tight connection
Compatible with most brands of 1/4" Barbed Fittings, Spot Watering Emitters, Micro-Bubblers, Misters and Sprays
Designed for underground or above-ground installation
Description
Rain Bird T22-250S Drip Irrigation 1/4" Blank Distribution Tubing, 250' Roll, Black. Versatile 1/4" blank distribution tubing may be used as the main line in a small Drip irrigation system or to branch off from 1/2" Drip tubing to individual micro- watering devices and plants. Rain Birds 1/4" distribution tubing is the strongest and most flexible tubing available; constructed of UV-resistant polyethylene resin materials giving it the flexibility of vinyl with the hold of poly. Unique Micro-Porous design creates an ultra-tight connection; tubing expands over fittings then shrinks making it almost impossible to remove without cutting. Textured finish improves handling to make connections faster and easier. Compact coiling method allows tubing to remain coiled as its extracted; making it easy to use, store and eliminates waste. Tubing is easy to unroll and stake in gardens, flower beds, ground cover or other landscaped areas. Industry leading flexibility allows tighter turns with fewer elbows for fast, easy installation. Perfect for small, narrow and tight planting areas, as well as areas with tight curves or many switchbacks. Professional-grade for unmatched resistance to chemicals, algae growth and UV damage. Designed for underground or above-ground installation. Rain Bird 1/4" Tubing is commonly used with Spot Watering Emitters, Micro-Bubblers, Misters and Sprays; also to run water to 1/4 Emitter Tubing (from 1/2 distribution or emitter tubing and a wide variety of Drip manifolds).70 PSI pressure rating exceeds competitors specifications. Compatible with most brands of 1/4 barbed Drip fittings and micro-watering devices. High-quality Rain Bird fittings (sold separately) are available in coupling, elbow, tee, plug and valve models; plus stakes in plastic and galvanized versions. Specifications: black, 0.255" outside diameter, inside diameter 0.165", wall thickness .04", pressure rating 0 to 70 PSI. Also available (sold separately) in: 50' (T22-50S) and 100' (T22-100S) rolls. Rain Bird The Intelligent Use of Water8. Rain Bird T70-500S Drip Irrigation 1/2" (.700" OD) Blank Distribution Tubing, 500', Black
Feature
Rugged, flexible tubing that's easy to unroll and stake in garden, flower bed, ground cover or other landscaped areasProfessional-grade; won't clog and requires no maintenance
Connects easily to your faucet, garden hose, or existing underground sprinkler head (with Rain Bird conversion kits)
Extra flexibility for kink-free installation, unmatched resistance to chemicals, algae growth and UV damage
Self-dispensing coil reduces layout time and speeds installation
Unique Micro-Porous design creates an ultra-tight connection to fittings
Connect in any arrangement using Rain Bird 1/2" universal barbed or Easy Fit compression fittings and stakes (sold separately)
Description
Rain Bird T70-500S Drip Irrigation 1/2" (.700 OD) Blank Distribution Tubing, 500', Black. High quality, flexible 1/2" blank distribution tubing used to run water to landscaped areas to connect 1/2 Emitter Tubing, or tapped into with 1/4" fittings for use with micro-watering devices. Designed for clog-resistant flow and connects easily to your faucet, garden hose or existing underground sprinkler head (using Rain Bird kits sold separately: FCKIT-1PK, EF075FHTS, RCKIT-1PS). Professional-grade features include extra flexibility for kink-free installation, plus unmatched resistance to chemicals, algae growth and UV damage. Tubing is easy to unroll and stake in gardens, flower beds, ground cover or other landscaped areas. Industry leading flexibility allows tighter turns with fewer elbows for fast, easy installation. Perfect for small, narrow and tight planting areas, as well as areas with tight curves or many switchbacks. Designed for underground or above-ground installation. Unique Micro-Porous design creates an ultra-tight connection; tubing expands over fittings then shrinks making it almost impossible to remove without cutting. Unique compact coiling method allows tubing to remain coiled as its extracted making it easy to use, store and eliminates waste. Just cut, place and connect in any arrangement using Rain Bird 1/2" universal barbed or Easy Fit compression fittings and stakes (sold separately). Specifications: Color black; outside diameter 0.700"; inside diameter 0.600"; wall thickness 0.60; pressure range 0 to 70 PSI. Also available (sold separately) in: 2' length (T70-2S), 50 (T70-50S), and 100 (T70-100S) rolls. Rain Bird The Intelligent Use of Water9. DIG SHB106 1/4-Inch x 100-Feet Dripline with 6-Inch Emitter Spacing (Brown)
Feature
6 in. pre-inserted emitter spacing, 1/2 GPH flow rate from each emitter, 100 ft. LUse for planter boxes, window boxes, closely planted or narrow areas, vegetable gardens, or looped around roses, shrubs, trees, for gravity feed systems, and for green roofs
No special tools or glues necessary for installation, Allows water to drip directly to the root zone, delivering a constant deep watering
Can be used in both new and existing landscape areas
Use for commercial and residential applications
Description
Extremely versatile and flexible, DIG's 1/4 inch Micro Drip Line presents key advantages over other irrigation methods, utilizing low cost, small diameter drip line that can be used in any part of the garden for a water-efficient drip irrigation system. The micro drip line's cylindrical labyrinth-like drip emitters are built into the interior wall of the 1/4" micro tubing at 6 inch, 9 inch, or 12 inch spacing. The micro drip line can be installed in a wide range of above ground application layouts, or used under mulch or bark to conserve water or for aesthetic reasons. The drip line is designed to be extended from the drip tubing or micro tubing using a 1/4 inch barb, or attached into DIG's four- or six- outlet drip manifolds. The drip line can be used in planter boxes, vegetable gardens, window boxes, box gardens, looped around individual plants or tree, in narrow paths of planting area, or where total saturation is desired along the drip line path, while eliminating discoloration of fences, windows, and walls due to water staining.10. Rain Bird T63-500S Drip Irrigation 1/2" (.630" OD) Blank Distribution Tubing, 500' Roll, Black
Feature
Rugged, flexible tubing that's easy to unroll and stake in garden, flower bed, ground cover or other landscaped areasProfessional-grade; won't clog and requires no maintenance. Tubing Diameter- 1/2 inch. Application-Hills/Slopes, On Surface, Sub-Surface
Connects easily to your faucet, garden hose, or existing underground sprinkler head (with Rain Bird conversion kits)
Extra flexibility for kink-free installation, unmatched resistance to chemicals, algae growth and UV damage
Self-dispensing coil reduces layout time and speeds installation
Unique Micro-Porous design creates an ultra-tight connection to fittings
Connect in any arrangement using Rain Bird 1/2" universal barbed or Easy Fit compression fittings and stakes (sold separately)
Recent Comments