Which are the best ammeter tester available in 2019?
We spent many hours on research to finding ammeter tester, reading product features, product specifications for this guide. For those of you who wish to the best ammeter tester, you should not miss this article. ammeter tester coming in a variety of types but also different price range. The following is the top 10 ammeter tester by our suggestions:
Best ammeter tester
1. Etekcity Digital Multimeter Amp Volt Clamp Meter Voltage Tester with Ohm, Continuity, Diode and Resistance Test, Auto-Ranging, Red, MSR-C600
Feature
Autoranging clamp multimeter measures AC currents, AC/DC voltage, resistance, and also provides diode and continuity testsThe clamp measures the AC current in a conductor up to 26mm without interrupting the circuit
Additional features include: Data Hold, Max Reading, and an easy-to-read large LCD
Comes with a handy carrying pouch, perfect for use while you're on the go
Automatically enters sleep mode after 15 minutes of inactivity for energy conservation; 1-year warranty and lifetime support from Etekcity
Description
Etekcity's Digital Clamp Multimeter makes household electricity maintenance safe and simple. While having the capability to test AC/DC voltage, resistance, continuity and diodes, the built-in clamp enables you to measure AC current without needing to break circuits to come into direct hazardous contact. With a capacity of 400amps, the clip can comfortably extend to test cords and wires up to 28 mm in diameter. The multimeter also includes safely insulated test probes with plastic gripping for safer handling while measuring. and easier. This device is the perfect startup multimeter for entry-level electricians, hobbyists, and general household uses.Specifications
Safety/Compliances: IEC61010 CAT.II 600V, CAT.III 300V over voltage and double insulation
Display: Maximum display 1999
Range selection: Auto ranging
Overload display: Display OL or OL
Measurement Speed: Updates 3 times/second
Max.Jaw Opening: 28mm diameter
Tested Max. Current Conductor Size: 26mm diameter
Diode test: Yes
Continuity test: Yes
Battery Life: about 150hours (alkaline battery)
AC Current:
-Range and Accuracy: 2A{<1A, (4%+40); 1A, (3%+30)}, 20A{4A, (3%+12), >4A, (2%+8)}, 200/400A (1.5%+5)
- Overload Protection: 400A rms
AC Voltage:
- Range and Accuracy: 2/20/200V (1.2%+5), 600V (1.5%+5)
- Input Impedance: 10 M<100pF
- Overload Protection: 600V rms
DC Voltage:
- Range and Accuracy: 200mV (0.8%+3); 2/20/200V (0.8%+1); 600V (1%+3)
- Input Impedance: 10 M
- Overload Protection: 600V rms
Resistance:
- Range and Accuracy: 200 (1.2%+2); 2/20/200K (1%+2); 2M (1.2%+2), 20M (1.5%+2)
- Input Impedance: 10 M
- Overload Protection: 600Vp
Package Includes
1 x Etekcity Digital Clamp Meter
2 x Test Leads (a pair)
2 x AAA 1.5V batteries (installed)
1 x Carrying Bag
1 x User Manual
2. Etekcity Digital Multimeter, MSR-R500 Electronic Amp Volt Current Ohm Voltage Meter Ammeter Multimeters with Diode and Continuity Test Tester, Backlight LCD Display (Red)
Feature
ACCURATELY MEASURES: Voltage, current, resistance, diode, continuity, and moreHELPFUL TROUBLESHOOTING: Use it to safely and accurately troubleshoot automotive and household electrical issues
EASE OF USE: Data Hold button holds a reading; large backlit LCD with large digits is easily visible in dimly lit areas
SAMPLING SPEED: 3 times per second. Built-in support stand allows for hand free use
SAFETY PROTECTION: Overload protection on all ranges. Protective rubber sleeve around the multimeter adds extra drop protection
1 Year Warranty and Lifetime Support from Etekcity
NOTE: this multimeter cannot be used to test AC current! Please make sure the rotary switch is located at the right range during use.
Description
Do It All, and Then Some
The Etekcity MSR-R500 Digital Multimeter is a practical tool for electricians, hobbyists, and general household use. It is easy to operate and features many different functions for measuring current, voltage, and resistance, as well as continuity, transistor, and diode testing. It can be used to diagnose, assemble, and repair circuitry and wiring. Other features include a low battery indicator, continuity buzzer, and overload protection. It's tough rubber sleeve protects it from the drops and falls associated with the toughest jobs.
Built for Everyday Use
A Data Hold function keeps the measurements displayed on the MSR-R500 while you record them and a larger display makes the MSR-R500 multimeter even easier to read. Add in the LCD backlight and protective rubber bumper and this is the meter for every job.
Specifications
Safety/Compliances: IEC61010 CAT.I 600V, CAT.II 300V, double insulation
Max.display: 1999, 3 1/2 digits
Range selection: Manual ranging
Overload display: Display OL
Sampling Speed: 2 times per second
Power: 1 x 9V 6F22 Battery Included (Low Battery Indication)
Diode Test: Yes
Continuity Test: Yes
Square Wave Output: Yes
Dimensions: 5.1" x 2.9" x 1.4"
DC Voltage: 200mV/2000mV/20V/200V (0.5%+2), 500V (0.8%+2)
AC Voltage: 200V/500V (2%+10)
DC Current: 2000A/20mA (1%+2), 200mA (1.2%+2), 10A (2%+5)
Resistance: 200 (0.8%+5), 2000/20K/200K (0.8%+2), 20M (1%+5), 200M [5%(reading-10)+10]
Package Includes
1 x Etekcity MSR-R500 Digital Multimeter
2 x Test Leads (pair)
1 x GP Supercell 6F22 9V Battery
1 x User's Manual
3. DC Ammeter, DROK Digital DC Multimeter 0-90V 100A Voltmeter Ammeter 12v 24v 30v 48v 60v 80v Voltage Volt Current Amp Power Watt Capacity Time Meter Battery Tester Monitor with LCD Screen Hall Sensor
Feature
MULTIMETER: this DROK digital multi-function meter can be used to test voltage, current, power, capacity time and other physical information; current measurement range is 0~100A; voltage measurement range is 10~90V.HALL SENSOR: DROK voltage current meter adopts non-contact Hall sensors to test current, which is safety and convenient. Moreover, the instrument show date in colorful LCD display and its information is comprehensive and humane.
MEMORY FUNCTION: accumulated capacity will be stored when power off suddenly, you can clean it up or make it full.
PROTECTIVE FUNCTION: the voltmeter ammeter can be set parameters for overvoltage protection, undervoltage protection, over current protection, over charging capacity protection and time protection and so on.
APPLICATION: DROK volt ampere tester is quite suitable for monitoring the output voltage and current, as well as applications such as battery charge and discharge.
Description
Parameters:
Current Measurement Range: 0~100 A
Voltage Measurement Range: 10~90 V
Display Resolution: 0.1A
Current Precision: 3% 5 digits
Voltage Precision: 2%5digits
Measurement rate: 5time/second
Open Holes (mm): 76.5*39.2mm
Size: 794352(mm)
Protection Functions:
OVP ( Over-voltage protections): 0.01V~90V
OPP( Over-power protections ): 0.01W~9.99KW
LOP( undervoltage protection): 0.01V~90V
OCP( Over-current protections ): 0.1~100A
OAH( Over-charge protection ): 0.01AH~9999AH
OFT( Over-time protection ): 1min~99hour59min
Package Includes:
1* Multifunctional Bidirectional Meter
1*Hall Sensor
4. MakerHawk USB 3.0 Tester, USB Power Meter, 3.7-30V 0-4A Voltage Tester Multimeter, USB Current Meter Tester, IPS Color Display Voltmeter Ammeter, USB Charger Tester AT34
Feature
Guide Video: https://www.youtube.com/watch?v=Alta7jcpgBI . Testers are widely used in the quality inspection of 3C digital peripheral products, and are the first choice for digital gamers and electronic enthusiasts.Real-time detection of the state of charge of the appliance, voltage, current, power and other indicators at a glance; Measuring voltage: 3.7V-30V; measuring current: 0-4A.The AT34 uses a 0.96-inch IPS high-definition color LCD display to display the state of charge of the appliance, voltage, current, capacity, energy, power, equivalent impedance, temperature and other indicators at a glance. 160 degree wide viewing angle, high brightness and long working life. Fast charge recognition, widely compatible: AT24 supports QC2.0, QC3.0, i Phone 2.4A/2.1A/1A/0.5A, Andriod DCP, fast charge protocol identification, let you know the state of charge of the phone.
Power-off storage, data is guaranteed: AT34 has power-off storage function, which can store capacity and energy data when the mobile power is cut off, which is convenient for subsequent viewing and convenient for capacity energy measurement of mobile power.Note: Other USB testers that do not have a power-down storage function cannot test capacity and energy.
4-bit accuracy for more accurate measurements; Measure the load equivalent impedance and power; Thermometer function, Celsius and Fahrenheit free switching: Using high-precision thermistor sensor; USB 3.0 interface: Compatible with USB 2.0, support high current test, support USB3.0 interface mobile hard disk and U disk test.
Measure the quality of the charger: connect the same load, compare the no-load and the load, the greater the voltage drop, the worse the charger capacity is, the worse the quality; the voltage drop is not obvious or the voltage rises (leisure loss) Compensation function) The better the load capacity of this charger, the better the quality.
Description
Technical Parameters:Model: AT34
Measuring voltage: 3.7-30V
Measuring current: 0-4A
Capacity measurement range: 0-99999mAh
Energy measurement range: 0-99999mAh-999.99Wh
Load impedance measurement range: 1-9999.9
Temperature measurement range: 0C-80C / 32F-176F
Operating temperature range: 0C-45C / 32F-113F
Product size: 64mmx22mmx12mm
Display screen: 0.96 inch color LCD
Voltage measurement resolution: 0.01V
Current measurement resolution: 0.001A
Voltage measurement accuracy: (0.8% + 4 words) 25 C
Current measurement accuracy: (1% + 4 words) 25 C
Power measurement range: 0-120W
Temperature measurement error: 3C / 6F
Refresh rate: 2Hz
Applications:
Testers are widely used in the quality inspection of 3C digital peripheral products, and are the first choice for digital gamers and electronic enthusiasts.
Real-time detection of the state of charge of the appliance, voltage, current, power and other indicators at a glance;
Fast charge recognition, widely compatible: AT24 supports QC2.0, QC3.0, i Phone 2.4A/2.1A/1A/0.5A, Andriod DCP, fast charge protocol identification, let you know the state of charge of the phone .
Power-off storage, data is guaranteed: AT34 has power-off storage function, which can store capacity and energy data when the mobile power is cut off, which is convenient for subsequent viewing and convenient for capacity energy measurement of mobile power.
USB 3.0 interface: Compatible with USB 2.0, support high current test, support USB3.0 interface mobile hard disk and U disk test.
Package Including
1 * AT34 USB Tester
5. DROK 0.39LED 2in1 Multimeter AC500V 200A Voltmeter Ammeter, AC Volts Meter Panel Ammeter Gauge with Current Transformer, Two-wires Digital Ammeter Volts Meter Tester
Feature
Measuring range -- DROK voltmeter ammeter voltage range is AC 130-500V, current range is 0.0-200A.Clear color display -- the multimeter can clearly display voltage and current at the same time, red for voltage, green for current.
With precise CT -- DROK volt amperage meter is equipped with CT, no need to buy another. Can be installed on anywhere flexibly.
Simple connection -- the voltage ampere monitor gauge is powered by the circuit being measured, no need to connect extra power source.
Special design -- DROK volts amp tester is designed with built-in trimmer potentiometer, enable you to calibrate the meter easily. Back cover made it more safer to be used.
Description
Description:Display voltage and current on the same screen with different color (red for voltage, green for current).
Green terminal should be connected to the CT; the red line and black line should be connected to the circuit being tested. Wrong connection will burn the meter.
Note:
1. Please connect all components in your circuit at first, and connecting the 220V power supply must be the final step. Do not touch the circuit and any parts on the back of this product after connecting with power supply to avoid electric shock.
2. Not suitable for high frequency electronic speed control, non city electric sine wave frequency or other occasions with high frequency components, because the product adopts the theory of capacitor step-down.
Parameters:
Voltage measuring range: AC130-500V
Current measurement range: AC0.0-200A
Resolution: 1V 1A
CT inner hole: 25mm
Measurement accuracy: 1% + 2 digits
Display: 0.39 inch LED digital tube display
Measuring speed: about 2times per second
Exterior dimension: 70 * 40 * 30 mm
Installation dimension: 68 * 38mm
The power supply line, measuring length: about 150mm
Transformer lead length: about 100mm
Operating temperature: -10 ~ +50
Working humidity: 10 ~ 80% (no condensation)
Working pressure: 80 ~ 106kPa
Sun exposure: no direct exposure
Package includes:
1x Digital Volt Ampere Meter + 1x Current Transfer (CT)
6. WATERWICH DC12-24V/0.1-10A Dual LED Digital Multimeter Amp Voltage Meter 2-in-1 Current Tester and Voltage Tester for Boat Marine Vehicle Truck ATV Car Camper LED Round Panel (Red)
Feature
2-in-1 current voltage meter, real time monitoring battery of vehicles, remind you of charge or replacement in time, better avoid emergent dead battery at starting car engine!High temperature resistant,Made of Eco-friendly & flame retardant durable ABS plastic and good conductivity pins with black matte surface treatment, wear and tear resistant for long lasting durability,CE Certification.NOT WATERPROOF
Manual:This is the only 2-in-1 current voltage meter that didn't come with Installation Notes,but We show the wiring diagram in the product picture.And is very easy to Install.Require external power supply; with reversed connection protection
Panel Flush Mount and Easy to Install, drill size of 1.15" diameter, ,Comes with 3 terminals.with Twist & Lock fastener for stable mounting, Fits to almost all panel locations you desired!
Note: 10A below ammeter (include 10A), built-in shunt, does not require external shunt Over-current,Over-volt and Short Circuit Protection, well protects the whole circuit, fits for most 12-24V Boat Marine Vehicle Motorcycle Truck ATV UTV Car Camper LED Round Panel
Description
Specifications:Voltage measuring range: DC10V-28V
Ammeter measuring range: DC 0.1A-10A
Display color : Red / Blue/ Green
Operating temperature: -40 to 85
Features:
Display the AC voltage and current simultaneously by LED digital tube.
With reversed-connection protection to avoid burning when connected reversely.but the max power supply can not exceed DC 28V .
Timely grasp the state of battery voltage, voltage measurement purposes can also be used for other products
shows you the voltage readings and helps you to better monitor car voltage condition. Say Goodbye to Exhausted Battery Before Each Drive!
Built in over current, over voltage and short circuit protection,
CE Certification,High temperature resistant,it well protects the whole circuit. While made of eco-friendly and flame retardant ABS plastic shell and good conductivity
connecting pins, it is super sturdy and lasts for a long long time.
Panel Flush Mount and Easy to Install, drill size of 1.15" diameter, ,Comes with 3 terminals.with Twist & Lock fastener for stable mounting, Fits to almost all panel locations you desired!
Fits for most 12-24V Boat Marine Vehicle Motorcycle Truck ATV UTV Car Camper LED Round Panel
Notice:
10A below ammeter (include 10A), built-in shunt, does not require external shunt
7. MakerHawk USB Multimeter USB Voltmeter Ammeter Load Tester USB Voltage Current PD Battery Power Capacity Charger Digital Type C Meter Tester Color LCD Display Cable Resistance QC2.0/3.0/4.0 MTK
Feature
Guide Video: https://www.youtube.com/watch?v=T8AchDV0UzY. The Video of Changing Language Link: https://drive.google.com/file/d/1ct0O-rWlLdOjZEyCiPnjkz9rht5eYTOi/view?usp=sharing. PC software installation instruction and PC software and Android APP Download Link: http://www.mediafire.com/folder/1c04afq923397/A3Supports Type-C interface full transmission compatible with PD protocol and Qualcomm QC3.0/4.0 protocol: One table is compatible with multiple protocols for fast charging, supporting multiple protocols such as PD QC2.0 QC3.0/4.0 MTK. Supports 360-degree arbitrary rotation of the screen to meet any angle reading.
Voltage, current curve - online mobile phone, computer: automatically change the range within 0.00A-3.00A measurement range, real-time display of fluctuations. In addition, you can press the "Next Page" button to switch to the voltage measurement waveform diagram, automatically change the range within the range of 4.5V-24V measurement, real-time display of voltage fluctuations.
Wire resistance measurement: After the data line is inserted, the screen of the tester turns black, indicating that the pressure difference is too large; the tester enters a 4.5V power-down state and needs to reduce the load current, and starts measuring from the first step; after the wire resistance measurement is completed, the test is performed. The meter will restart measurement after the next power up.
Notebook Charging Measurement: When the notebook is powered, prepare two Type-C cables, one for connecting the power supply to the watch, and one for connecting the watch to the computer to measure the charging data of the notebook. The notebook can be used to measure high-power notebooks and monitor the aging of the battery. Laptop fast charge effect.Multi-screen interface design, and full help menu, no need to read the instructions.
Description
Descriptions:Test charger: Can measure various USB chargers, then insert adjustable constant current load at the output port for current adjustment to test the current and voltage data of the charger.
Test charging treasure capacity.
Test the charging data of various digital devices: Real-time monitoring of mobile phone charging status and protecting mobile phones.
Feature:
Model: A3
Bluetooth: No
Product weight: 18g
Input voltage: 4.5-24V
Input current: 0-3A
Capacity measurement range: 0-99999mAh
Energy measurement range: 0-99999mWh
Load impedance measurement range: 1.5-9999.9
Temperature Measurement Range: -10C to 100C/0F to 200F
Screen brightness setting: 0-5
Voltage curve range: 4.5V-24V
Voltage measurement resolution: 0.01V
Current measurement resolution: 0.001A
Voltage measurement accuracy: 0.2%
Current measurement accuracy: 0.8%
Time measurement range: 0-99 hours 59 minutes 59 seconds
Temperature measurement error: 3C/6F
Delay off screen time: 0-9 minutes
Current curve range: 0-3A
Fast charge recognition mode: QC2.0, QC3.0
Refresh rate: 2Hz
Product Size: 71.2 x 31.8 x 12.4mm
Display screen: 1.44 inch color LCD display
Package Including
1 * USB voltage tester no Bluetooth
8. LALICORP New Professional Digital LCD Voltmeter Ammeter Ohm Tester Multimeter Buzzer AC DC Ohmmeter Volt Meter Tester NEW
Feature
DIY Supplies:ElectricalDisplay Type:Digital Display
Measuring Inductance Range:-
Operating Temperature:0 - 40
Dimensions:123 * 67 * 20 mm
Description
New Professional Digital LCD Voltmeter Ammeter Ohm Tester Multimeter Buzzer AC DC Ohmmeter Volt Meter Tester VEH58
Description
A practical tool for electrician use. It is easy to operate and the readings indicated directly on the screen. It can be used to overhaul all kinds of circuit boards. It is also an ideal teaching instrument for students.
Features
3½ digits, 7segment, 0.5"high LCD Display
Max display: 1999, Auto polarity display
Small and compact design
Overload protection on all ranges
Sampling 2~3 times readings per second.
Diode assembly test / Transistor P-N junction test/Transistor hFE test.
Low battery voltage indication.
Specifications
Model: DT832
Measuring range:
Max AC Current: 10A
Max AC Voltage range: 1000V
Max DC Voltage range: 750V
Resistance Measurement: 200 Ohm-2000K Ohm range
Buzzer: Yes
Color: Black
Size: Approx. 123 x 67 x 20mm (L*W*H)
Scale degree & Accuracy:
Showed as in the table:
Function
Range
Resolution
Accuracy
DC Voltage
200mV
100uV
(0.5%+2)
2000mV
1mV
20V
10mV
200V
100mV
1000V
1V
(0.8%+2)
AC Voltage
200V
100mV
(1.2%+10)
750V
1V
DC Current
200uA
0.1mA
(1%+2)
2000uA
1uA
20mA
10uA
200mA
100uA
(1.2%+2)
10A
10mA
(2%+2)
Resistance
200
0.1
(0.8%+2)
2000
1
20K
10
200K
100
2000K
1000
(1%+2)
Package Included
1 x Digital Multimeter (Not Included Battery)
1 x Test Lead Set
1 x User Manual
9. DROK 090045 0.36" High Accuracy DC 0-3.0000A Ammeter Current Ampere Panel Meter Gauge Current Monitor Amperage Tester Blue LED Digital Display with Built-in Shunt
Feature
Has high accuracy, measurement range is 0-3.0000A.0.36'' 5 digital blue LED display, the screen is very bright.
Small size, the dimension is 48mm*29mm*21mm.
Power supply has reverse connection protection to prevent meter burning.
It is flexible to power it, can use system common ground power supply(need separate power supply).
Description
Features:Measurement Range: DC 0-3.0000A
Power Supply: DC 3.5-30V
Display: five 0.36" LED digital tube
Display Color: Blue
Refresh Speeds:> 3 times per second
Measurement Accuracy: (0.5 + 2 digits)
Operating Temperature: -10 c ~ 65 c
Dimensions: 48 x 29 x 21mm
Temperature Coefficient: less than 50PPM / c
Built-in shunt, don't need extra shunt
Anti-reverse protection
Wiring:
PWR-Red(thin): power supply+ (3.5-30V DC)
PWR-black(thin): power supply- (when powered by measuring circuit, connect nothing)
Red(thick): current measurement signal input+
Black(thick): current measurement signal input-
(please refer to the pictures for more details)
Note:
This meter needs separate power supply, the power is DC3.5-30V.
Package Includes:
1x Digital Ammeter
10. Reliance Controls Ammeter and Wattmeter THP103 AmWatt Appliance Load Tester/Plug, Blue
Feature
Meter gives instant, accurate digital readoutReadout measures amps or watts used by common-cord connected household appliances (1.0 to 15.0 amps, 125 to 1,875 watts)
Long 26-inch cord reaches remote electrical outlets
Rugged, high-impact construction
Easy slide-switch action insantly converts between amps and watts
Recent Comments