Which are the best potentiometer guitar available in 2019?

We spent many hours on research to finding potentiometer guitar, reading product features, product specifications for this guide. For those of you who wish to the best potentiometer guitar, you should not miss this article. potentiometer guitar coming in a variety of types but also different price range. The following is the top 10 potentiometer guitar by our suggestions:

Best potentiometer guitar

Product	Features	Editor's score	Go to site
	CTS TAOT CUSTOM 525K LONG Shaft Potentiometers - 5% Tolerance (All Pots Meter 500K-550K) - Set of 4 (4X)		Go to amazon.com
	CTS 250K Short Split Shaft Audio Pots - 450G Series - Lot of 3 (3X) + .022uf Orange Drop cap for Fender Strat		Go to amazon.com
	Bourns Set of Four (4X) 500K SHORT Split Shaft Audio Taper Low Friction Potentiometers		Go to amazon.com
	Set of 4 (4X) CTS 500K Short Split Shaft Audio Taper Potentiometers		Go to amazon.com
	Fender 500K, Split Shaft Potentiometer for Volume or Tone		Go to amazon.com
	Seymour Duncan 500K Potentiometer		Go to amazon.com
	Guitar Potentiometer Audio POTS A500K OHM Replacement for Electric Guitar Pack of 10		Go to amazon.com
	Allparts CTS 500K SHORT Split Shaft Audio Taper Potentiometer		Go to amazon.com
	Bourns Guitar & Amp Potentiometer, 500K Audio, Knurled Split Shaft		Go to amazon.com
	B500K OHM Guitar POTS Audio Split Potentiometer Replacement for Electric Guitar Pack Of 10		Go to amazon.com

Related posts:

1. CTS TAOT CUSTOM 525K LONG Shaft Potentiometers - 5% Tolerance (All Pots Meter 500K-550K) - Set of 4 (4X)

Feature

SET OF FOUR (4X) - TAOT CUSTOM 525K LONG Split Audio Taper Potentiometers Pots. Custom Manufactured for The Art Of Tone (TAOT) by CTS
5% Tolerance - All Pots Meter between 500K-550K
High Quality Brass Bushing & Brass C-clip reinforced Shaft
3/4" Bushing Height - Hardware includes second hex nut for proper mounting
PLEASE NOTE! 1). Not suitable for import guitars. 2). A long shaft pot is not a drop in fit. You need to use the second hex nut to set the height of the shaft through the body.

Description

We are pleased to offer our own custom branded pots manufactured by CTS to our specifications. These are identical in construction to CTS high quality 450G series pots, but with a slightly higher resistance level specified at 525K. This means no exceptionally low or high resistance pots that can be found when using typical 20% tolerance 500K pots. At 5 percent tolerance all pots are guaranteed to measure between 500K to 550K resistance. The only thing that might make these pots better is if they came with bacon. PRODUCT SPECIFICATIONS - 525K Ohms/5% Tolerance (Value can range from 500K to 525K) Audio Taper Bakelite base plate Solid brass c-clip reinforced shaft Solid brass bushing 3/8-32 US thread 3/4" (long shaft) bushing height Split, fine 24-tooth knurled shaft 1/4" diameter shaft Each pot comes with hardware - two nuts, dress washer and lock washer Requires 3/8 inch diameter mounting hole. Pot is manufactured and branded by CTS specifically for The Art Of Tone (TAOT), Part # 450S525KXL TAOT. SOME THINGS TO CONSIDER: 1. If you are uncertain whether your guitar uses short (3/8 inch) or long (3/4 inch) shaft pots, as a general rule this pot will fit most USA-made Gibson Les Pauls manufactured after 1977 excluding historic reissues, but please double check before you order. 2. Make sure to pinch the tip of the shaft before you try fitting a knob, this will avoid getting knobs stuck before you install the pot. If you've ever had that happen... 3. If you have an import guitar it is probably using metric sized components and these pots cannot be used without modifying the openings on your guitar.

2. CTS 250K Short Split Shaft Audio Pots - 450G Series - Lot of 3 (3X) + .022uf Orange Drop cap for Fender Strat

Feature

250K ohm, Short (1/4" bushing height) Split Shaft Audio Taper, 10% Tolerance
450G Series with Solid Brass Bushing & Shaft
Low Friction Rotation
Includes Cornell Dubilier .022uf Orange Drop Capacitor
For U.S. Spec Guitars only. Not for use in import guitars with metric components

Description

This set up is ideal for replacing pots and cap in your Strat. High quality pots and cap. Not for metric guitars. Please don't flame us because the cap is not a Sprague. Sprague stopped making orange drops in 2012, and Cornell Dubilier has been making them since.

3. Bourns Set of Four (4X) 500K SHORT Split Shaft Audio Taper Low Friction Potentiometers

Feature

SET of 4 500K Split Shaft Audio Taper Pots - 3/8" bushing
Low Friction Rotation
18 Tooth Coarse Spline Shaft
Each pot comes with hardware - 1X Hex Nut and 2X Washers
NOT FOR IMPORT GUITARS!! These pots are sized for use in U.S. made guitars.

Description

Set of 4 Bourns 500K SPLIT knurled shaft audio taper potentiometers with low friction rotation. This a short shaft pot (threaded bushing is 3/8" tall and 3/8" diameter, shaft is 1/4" diameter). Pot is manufactured by Bourns. Note: 1. Requires 3/8" diameter mounting hole 2. If you have an import guitar it is probably using metric sized components and these pots cannot be used without modifying the openings on your guitar.

4. Set of 4 (4X) CTS 500K Short Split Shaft Audio Taper Potentiometers

Feature

CTS 500K Split Shaft Audio Taper Pots - 3/8" bushing height and diameter - Part #450S4072
Aluminum bushing and shaft
.236 diameter fine spline shaft for use with push on knobs
Suitable for either volume or tone controls - 15% Tolerance
Imperial (U.S. sizing) not for use with guitars using metric components

Description

CTS 500K split shaft audio taper pots. These can be used for either volume or tone. They have a better taper with a modern wiring configuration. Aluminum bushing and shaft. Durable CTS quality, priced right.

5. Fender 500K, Split Shaft Potentiometer for Volume or Tone

Feature

Genuine Fender Replacement Part
High Quality
Durable

Description

500K, Split Shaft Potentiometer (Volume or Tone)

6. Seymour Duncan 500K Potentiometer

Feature

Smooth Turning 500k Potentiometer
Custom-crafted by Bourns
For Volume or Tone Control; Knob Not Included
Split Shaft fits More Knobs
Evenly Tapered Control

Description

500K Potentiometer

7. Guitar Potentiometer Audio POTS A500K OHM Replacement for Electric Guitar Pack of 10

Feature

Long Knurled and split shaft, Full Size
Perfect for replacing and upgrading volume and tone controls.
A500K-ohm mini control pot
Coarse knurled shaft fits most control knobs
Any problem, please don't hesitate to contact us

Description

Specification:
100% Brand New, Never Used
High quality audio-potentiometers, perfect for replacing and upgrading volume and tone controls.
A500K-ohm mini control pot
Long Knurled and split shaft, Full Size
Coarse knurled shaft fits most control knobs
Shaft Diameter:Approx. 6mm
Shaft Length:Approx. 18mm
Full Length: Approx 27.5mm
Shaft Thread diameter:Approx. 7mm
Base Diameter:Approx. 16.5mm

Package Included:10 x A500k Guitar Potentiometers

8. Allparts CTS 500K SHORT Split Shaft Audio Taper Potentiometer

Feature

500K ohm resistance
Audio Taper
Suitable for use as volume or tone pot
3/8" bushing diameter X 3/8" height. Suitable for through body mount, not for guitars with control plates.
Not suitable for import guitars

Description

CTS 500K short shaft (3/8" bushing height) potentiometer. Audio taper suitable for either tone or volume controls. Not intended for use in import guitars that use metric components

9. Bourns Guitar & Amp Potentiometer, 500K Audio, Knurled Split Shaft

Feature

Pot - Bourns, 500K Audio Taper, Knurled Split Shaft

Description

Knurled split shaft, audio taper. 24 mm body diameter, 1/4 watt, 300 degree rotation. 1/4" shaft diameter, solder lugs. 3/8" bushing. BL=.38", SL=.38", 3/8-32 threading.

10. B500K OHM Guitar POTS Audio Split Potentiometer Replacement for Electric Guitar Pack Of 10

Feature

High quality audio-potentiometers, perfect for replacing and upgrading volume and tone controls
B500K-ohm mini control pot
Long Knurled and split shaft, Full Size
Coarse knurled shaft fits most control knobs

Description

100% new never used
High quality audio-potentiometers, perfect for replacing and upgrading volume and tone controls.
B500K-ohm mini control pot
Long Knurled and split shaft, Full Size
Coarse knurled shaft fits most control knobs
Shaft Diameter:Approx. 6mm
Shaft Length:Approx. 18mm
Full Length: Approx 27.5mm
Shaft Thread diameter:Approx. 7mm
Base Diameter:Approx.16.5mm

Package Included:10 x B500k guitar potentiometers

Conclusion

All above are our suggestions for potentiometer guitar. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using potentiometer guitar with us by comment in this post. Thank you!