Best pcie raid sata to buy in 2019
We spent many hours on research to finding pcie raid sata, reading product features, product specifications for this guide. For those of you who wish to the best pcie raid sata, you should not miss this article. pcie raid sata coming in a variety of types but also different price range. The following is the top 10 pcie raid sata by our suggestions:
Best pcie raid sata
1. Vantec 4-Channel 6-Port SATA 6Gb/s PCIe RAID Host Card with HyperDuo Technology (UGT-ST644R)
Feature
4 Channel for Additional Devices. This Card will let You Grow as Your Needs Grow to Add more Devices to your System6 Flex Configurable Port for configuring as Internal SATA or External eSATA Port using simple setting on the Host Card
SATA III 6Gb/s on Every Channel for all your SSDs and HDD. This Offers the Maximum Performance for all your Drives
Port Multiplier Function For Multi-Bay Enclosures to Minimize multiple cable and Maximize Storage, Support both FIS and Command-based Switching
RAID 0, 1, 10 and HyperDuo Function for Redundancy to Keep your DATA Safe and at the same time Faster Disk Access
More lanes to Prevent bottleneck for All the SATA III drives Moving Data between the Drives and the System Board
Low Profile Bracket Included to Simplify Your Installation into Standard Desktop or SlimLine or Low Profile System
HyperDuo is a Technology Created by Marvell that Encompasses Both SSD and HDD Technologies to give You the Speed Without the Premium Price
Support Windows XP, Server 2003, Server 2008, Vista, 7, 8, 8.1, 10
Description
The UGT-ST644R design encompasses great design and server technology into simple RAID Host controller. It uses the latest storage technology to bring SSD caching storage to the HDD drive to gain unparalleled access speed. This RAID Host controller enables2. Syba SD-PEX40054 4 Port SATA III Raid Hyper Duo PCIe 2.0 x 2 Card
Feature
PCI-E x4 slot is required. (It works with a x16 video slot too)Based on Marvell 88SE9230 chipset
Supports hardware RAID 0, 1, and 10
Hyper Duo mode supports safe mode (Mirrored protection) and capacity mode (Cost-Optimized) to build a system with SSD and HDD hybrid
Supports Native Command Queuing (NCQ)
Based on Marvell 88SE9230 Chipset
Changeable SATA 6.0Gbps Ports (Internally, Externally or Their Combination)
Up to 4 SATA Devices with Point-to-point Connectivity
Supports Hardware RAID 0, 1, 10 and JBOD
HyperDuo Mode Supports Safe Mode (Mirrored Protection) and Capacity Mode (Cost-Optimized) to Build a System with SSD and HDD Hybrid
Description
Marvell Hyper Duo technology combines solid state drive (SSD) speed and SATA HD capacity in a way it forms an ultimate High performance, cost effective and large storage system. SATA ports support port multiplying.3. Ableconn PEX-SAT4R 4-Port SATA 6G PCI Express 2.0 Host Adapter - PCIe AHCI SATA III 6Gbps RAID Controller Card Support HyperDuo SSD Tiering (Marvell 88SE9230 Chipset)
Feature
Supports SATA III transfer speeds up to 6.0 Gbps; backward compatible with SATA I/II at 1.5/3.0GbpsBuilt with Marvell 88SE9230. Supports Hardware RAID 0, 1, 10, and HybridDrive modes (powered by Marvell HyperDuo). Support on-the-fly AES 128/256-bit encryption
Support Port Multiplier FIS-based and Command-based switching
No driver installation is required on Windows 10/8/7/Vista, Server 2012/2008, Linux, Mac OS X 10.x and later.
High quality. Fully RoHS compliant. Made in Taiwan.
Description
Specification
* Connector:
- 4 x SATA (7 pin; DATA) Female
- PCI Express x2 Male
* Chipset: MARVELL 88SE9230
* Software:
- No driver installation is required on Windows 10/8/7/Vista, Server 2012/2008, Linux, Mac OS X 10.x and later. The AHCI drivers are natively built-in on most Operating Systems
- Drivers are available for Windows XP
- Provides Windows & Mac & Linux GUI and Windows BIOS to configure Hardware RAID 0, RAID 1, RAID 10, Hybrid Drive modes to drives these directly attached to this Host Adapter
* Data transfer rate:
- Up to 6 Gbps
* Number of Ports That Support Port Multiplier: 4 (can only use 1 PM at a time)
* Number of Drives Supported Through Port Multiplier: 1 to 4
* Supports up to 7 drives with 4 drives through PM
* 6 Gbps SATA III Internal 4 Ports PCIe Gen2 x2 lanes host adapter
* Hardware RAID controller to offload host CPU for max performance
* Supports PCIe 1.0 and PCIe 2.0 motherboard
* Compliant with 10Gbps PCI Express 2.0 x2
* Fully compliant with Serial ATA specifications3.0 transfer rate of 6Gbps
* Supports SATA I & SATA II & SATA III HDD, SSD, Optical Drive and Blu-Ray Drive
* Supports one (1) Port Multiplier with FIS-based or Command-based switching. Maximum 4 of individual drives through Port Multiplier.
* Supports ATA and ATAPI commands
* Supports SATA Hot-plug, and Native Command Queuing (NCQ)
* Support on-the-fly AES 128/256-bit encryption
* LED Pin headers for LED activity indicators for each port
* Low Profile PCIe form factor card on a regular size bracket with an additional Low Profile bracket included
* BIOS on board supports Windows booting
* Fully RoHS compliant.
* Made in Taiwan
4. StarTech.com 4 Port PCI Express 2.0 SATA III 6Gbps RAID Controller Card with HyperDuo SSD Tiering - PCIe SATA 3 Controller Adapter
Feature
Add 4 Internal SATA III (6Gbps) Ports to a computer through a PCI Express x2 slotPCI Express 2.0 SATA Controller with HyperDuo SSD Tiering
4 Port PCI Express SATA III 6Gb
Maximize system capability with SATA III connection speeds
4 AHCI SATA III (6Gbps) ports through PCI Express x2
Description
Add Four Internal SATA III (6Gbps) Ports To A Computer Through A PCI Express x2 Slot
The PEXSAT34RH 4-Port PCI Express 2.0 SATA Controller Card with HyperDuo adds four AHCI SATA III ports to a computer through a PCIe slot (x2), delivering multiple internal 6Gbps connections for high-performance hard drives and Solid State Drives (SSDs). Featuring HyperDuo technology, the SATA card offers SSD auto-tiering which lets you balance the performance advantages of SSD storage with the cost-effectiveness and large capacity of standard hard drives. By combining SSD and HDD drives into a single volume (up to 3 SSD + 1 HDD), HyperDuo discreetly works in the background to identify and move frequently accessed files to the faster SSD drive(s) for improved data throughput up to 80% of SSD performance! Note: The HyperDuo automatic storage tiering feature is compatible with Windows XP, Vista, 7, and 8 only.
View larger
View larger
View larger
View larger
The PCIe SATA controller card supports Port Multiplier (PM), enabling multiple SATA drives to be connected to one port over a single cable, for a total of seven drives (up to four drives through PM on one port, and a single drive to the remaining three ports). Plus, the SATA controller card offers an effective hardware RAID solution, with native RAID (0, 1, 1+0) support.
Product Features & Applications
- Use SSD tiering to optimize your system for I/O intensive applications such as Office Suites, photo/video editing and media players
- Upgrade an older PCIe-based system to SATA 6Gbps capability, to better utilize faster SATA drives
- Add more internal SATA ports to a computer system, to connect additional storage drives and/or optical drives
- Provide optimized off-site back-ups/vaulting, through built-in RAID 1 capability
- Perfect for multi-drive internal RAID storage solutions
- Supports HyperDuo SSD auto-tiering
- Four AHCI SATA III (6Gbps) ports through PCI Express x2
- Fully compliant with SATA 3.0 specifications and backward compatible with SATA I/II (1.5/3.0Gbps) drives
- Supports hardware RAID 0, 1, and 1+0 modes configured through BIOS
- Compliant with PCI Express 2.0 standards
- Port Multiplier FIS-based and Command-based switching supported
- Natively supported single chipset design
- Simple HyperDuo configuration via card-BIOS level or intuitive GUI console (Windows only)
- Supports Native Command Queuing (NCQ) and ATA/ATAPI commands
- Includes Low Profile/Half-Height installation bracket
- Supports HDDs/SSDs/Optical/Blu-Ray drives
- LED headers for HDD activity LED indicators
5. IO Crest 4 Port SATA III PCI-e 2.0 x1 Controller Card Marvell Non-Raid with Low Profile Bracket SI-PEX40064
Feature
We recommend a fresh Windows install with this cardDrivers are required for this card to function.
Chipset: Marvell 88SE9215
Compliant with PCI-Express Specification v2.0 and backwards compatible with PCIex1
Compliant with Serial ATA Specification 3.0
Supports Communication Speeds of 6.0 Gbps, 3.0 Gbps, and 1.5 Gbps
Hot Plug and Hot Swap
4 Internal SATA 6Gb/s Ports
Compatible with SATA 6G, 3G and 1.5G Hard Drives
PCI-Express x1 Interface is Compatible with PCI-Express x2, x4, x8, and x16 slots
Description
PCIe x1 Interface Version 1.0, 4-Port Internal SATA 6Gbps Controller Card, Non-Raid, Marvell 88SE9215 Chipset, with Low Profile Bracket. IOCREST newest card with advance Marvell 88SE9215 Chipset single chip 4-port Gen III 6Gb/s host controller.6. IO Crest 4-port SATA III PCIe 2.0 x2 Controller Card Green, SI-PEX40057
Feature
We recommend a fresh Windows install with this cardDrivers are required for this card to function.
Chipset: Marvell 88SE9230
Installed with a full profile bracket, Low profile included with the package
Port Multiplier FIS-based and Command-based switching supported
Supports SATA Rev 3.0 transfer speeds up to 6.0Gbps and backwards compatible with SATA I/II at 1.5/3.0Gbps
Supports RAID 0 and 1 modes, Requires at least a PCIe x4 slot to function
4 Internal SATA 6Gb/s Ports
Compatible with SATA 6G, 3G and 1.5G Hard Drives
PCI-Express x2 Interface is Compatible with PCI-Express x2, x4, x8, and x16 slots
RAID mode Supported: RAID 0/1/1+0
HyperDuo is configured with at least 1 hard disk drive (HDD) and up to 3 solid state drives (SSD). By embedding automated tiring technology into the chipset.
Does not support Hardware RAID using Port Multiplier
Support 3TB and 4TB GPT Hard drives
Chipset: Marvell 88SE9230
Description
The SI-PEX40057 4 port SATA III PCI-E 2.0 X2 Hyper Duo RAID controller card marvel 88SE9230 chipset adds four SATA III ports to a computer through a PCI-E 2.0 X2 slot, delivering multiple internal 6Gbps connections for SATA III hard drives and SSDs. Featuring Hyper Duo technology, the SATA card offers SSD auto-tiring which lets you balance the performance advantages of SSD storage with the cost-effectiveness and large capacity of standard hard drives. By combining SSD and HDD drives into a single volume (up to 3 SSD + 1 HDD), Hyper Duo discreetly works in the background to identify and move frequently accessed files to the faster SSD drivers) for improved data throughput. The Hyper Duo automatic storage tiring feature is compatible with Windows XP, Vista, 7, and 8 only.7. N N.ORANIE PCIe 2.0 x 1 to SATA III 4 Ports Adapter Card Marvell Chipset Non-Raid for IPFS Mining and Adding SATA 3.0 Devices
Feature
PCIe X1 to 4 SATA 3.0 6Gbps interfaces; transfer speeds up to 6.0Gbps; backwards compatible with SATA 1.0/2.0 of 1.5/3.0Gbps.PCI-Express V2.0 also compatible with PCI-Express V1.0, can be used on PCIe X2 X4 X8 X16 slots.
Port Multiplier FIS-based and Command-based switching supported; Chipset: Marvell.
Support Native Command Queue (NCQ); Support IDE/AHCI 1.0 mode; Compatible with SATA 6G, 3G and 1.5G Hard Drives; Support Hot Plug and Hot Swap; Support Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i.
Support Windows XP/Server 2003/Vista/7/8/10(32/64 bit)/Linux
Description
PCIe X1 to 4 SATA 3.0 ports controller card offers a simple connection between a host computerand SATA 3.0 devices(SATA hard drive or SATA device), which allows 4 SATA devices at the speed
up to 6Gb/s.
Features
Serial SATA 3.0, compatible with SATA 2.0 and SATA 1.0
PCI-Express V2.0, compatible with PCI-Express V1.0
Support speed of 6.0Gbps, 3.0Gbps, and 1.5Gbps
Compatible with SATA 6G, 3G and 1.5G Hard Drives
Support Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i
Support 4 SATA 3.0 6Gbps devices
Support IDE/AHCI 1.0 mode
Support Native Command Queue (NCQ)
Port Multiplier FIS-based and Command-based switching supported
Support Hot Plug and Hot Swap
PCI-Express X1, can be used on PCIe X2 X4 X8 X16 slots
Support Windows XP/Server 2003/Vista/7/8/10(32/64 bit)/Linux
Package includes:
1 X PCIe X1 to 4 SATA 3.0 ports controller card
1 X Drivers CD
8. Ableconn PEX10-SAT 10 Port SATA 6G PCI Express Host Adapter Card - AHCI 6 Gbps SATA III Low Profile PCIe 2.0 Expansion Card
Feature
Adds 10 SATA 6G ports through a Low Profile PCIe 2.0 x2 card to your PC System. It's an ideal solution for surveillance users to install up to 10 SATA drives and/or ODD drives in one low profile PCIe card without driver installation required. It is not positioned for performance storage such as multiple SSD drives.PCIe 2.0 x2 Low Profile PCIe form factor card on a regular size bracket with an additional Low Profile bracket included. Compliant with PCI Express v2.0 and backward compatible with PCI Express 1.x
Supports SATA I & SATA II & SATA III HDD, SSD, Optical Drive and Blu-Ray Drive. Support Native Command Queuing (NCQ), Hot plug and Hot swap SATA ports
No driver installation is required. The AHCI drivers are natively built-in on Windows 10, 8, 7, Vista, 2008, 2012, Linux, Mac 10.x and later.
Fully RoHS compliant. High quality product. Made in Taiwan.
Description
The Ableconn PEX10-SAT adds 10 SATA 6G ports through a Low Profile PCIe 2.0 card to your PC System. It's an ideal solution for surveillance users to install up to 10 SATA drives and/or ODD drives in one low profile PCIe card without driver installation required.
Specification
* Connector:
- 10 x SATA (7-pin, DATA) Female
* Chipset: ASMedia ASM1062 + 2x JMicron JMB575
* Data transfer rate:
- Up to 6 GBps
* Software:
- No driver installation required. The AHCI drivers are natively built-in on most Operating Systems
- Support Windows 10, 8, 7, Vista, 2008, 2012, Linux, Mac 10.x and later.
* 6Gbps SATA III Internal 10 Ports PCIe Gen2 2-lane Host Adapter
* Supports PCIe 1.0 and PCIe 2.0 motherboard
* Compliant with 10Gbps x2 PCI Express 2.0
* Fully compliant with Serial ATA specifications3.0
* Pin headers on board for activity indication on each channel
* Supports SATA III transfer rate of 6.0Gbps, 3.0Gbps, 1.5Gbps
* Supports ATA and ATAPI commands
* Supports SATA Hotplug, and Native Command Queuing (NCQ)
* Supports SATA I & SATA II & SATA III HDD, SSD, Optical Drive and Blu-Ray Drive
* Low Profile PCIe form factor card on a regular size bracket with an additional Low Profile bracket included
*Note: does NOT support SATA Port Multiplier
* BIOS on board supports Windows and Linux OS booting
* Fully RoHS compliant
* Made in Taiwan
Note: the product is not positioned for performance storage such as solid state drives. It's ideal for applications that need a lot of drives, or a huge capacity such as surveillance system, etc.
Package Contents
* Ableconn PEX10-SAT 10-Port SATA 6G PCIe Card
* 1x low profile PCIe bracket
9. I/O CREST 4 Port SATA III PCI-e 2.0 x2 Non RAID Hard Drive Controller Card Marvell 9235 Chipset
Feature
We recommend a fresh Windows install with this cardDrivers are required for this card to function.
Chipset: Marvell 88SE9235
Installed with a full profile bracket, Low profile included with the package
Port Multiplier FIS-based and Command-based switching supported
Supports SATA Rev 3.0 transfer speeds up to 6.0Gbps and backwards compatible with SATA I/II at 1.5/3.0Gbps
Supports Native Command Queue (NCQ)
4 Internal SATA 6Gb/s Ports
Compatible with SATA 6G, 3G and 1.5G Hard Drives
PCI-Express x2 Interface is Compatible with PCI-Express x4, x8, and x16 slots
Description
The SI-PEX40062 4 port SATA III PCI-E 2.0 X2 controller card marvel 88SE9235 chipset adds four SATA III ports to a computer through a PCI-E 2.0 X2 slot, delivering multiple internal 6Gbps connections for SATA III hard drives and SSDs. With full support for SATA 3.0 hard drives and data transfer speeds of up to 6 Gaps, the controller card features a native PCI Express single chipset that provides enhanced compatibility, reliability and performance for SATA 600 MB/s storage needs.10. StarTech.com 2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports - PCIe - Two Slot PCI Express M.2 RAID Card plus Two SATA Ports
Feature
Add two Next Generation Form Factor M.2 SSDs and two SATA ports to your computer through PCIe2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports / PCIe
2-Slot PCI Express SATA M.2 RAID Card / SATA 3 Controller Host Card Adapter
PCIe SATA Card for almost all SATA M.2 solid-state drives plus port multiplier up to 7 drives
Storage controller supports hardware RAID / NCQ / HybridDrives / SATA3 6Gbps
Perfect for data recovery & backup / Improves the storage & performance of a PC
Recent Comments