Top 10 recommendation thermostats controller 2019
When you looking for thermostats controller, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable thermostats controller is not an easy task. In this post, we show you how to find the right thermostats controller along with our top-rated reviews. Please check out our suggestions to find the best thermostats controller for you.
Best thermostats controller
1. Inkbird Itc-308 Digital Temperature Controller Outlet Thermostat, 2-stage, 1100w, w/Sensor
Feature
Plug and play design, easy to use;Dual relay output, be able to connect with refrigeration and heating equipment at the same time
Support reading with Centigrade or Fahrenheit unit
Maximum output load: 1100W(110V)
Dual display window, be able to display measured temperature and set temperature at the same time
Description
Main features:Plug and play design, easy to use;
Dual relay output, be able to connect with refrigeration and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load: 1100W(110V);
Dual display window, be able to display measured temperature and set temperature at the same time;
Temperature calibration;
Compressor delay protection for refrigeration control
High and low temperature alarms are available;
Over-temperature and sensor fault alarm
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Specification
Temperature Control Range : -50~99 C / -58~210 F
Temperature Resolution: 0.1 C / 0.1 F Temperature Accuracy: 1C (-50 ~ 70C) / 1F (-50 ~ 160 F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~265VAC, 50Hz/60Hz Temperature Control Output: Max. 10A, 100V ~265V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Dimension Body: 140x68x33mm (5.5x2.7x1.3inch)
Socket: 85x42x24mm(3.3x1.7x1inch)
Ambient Temperature: -30~ 75 C / -22~ 167 F
Storage Temperature: -20~ 60 C / -4~ 140 F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
Package Content:
1x ITC-308 temperature controller;
1x Manual
Note: This listing sensor's probe dimension is 50mm x 6mm. If you want 12" probe sensor, you can search on Amazon and buy one by ASIN: B01A6DIPFM or ASIN: B01A51OLR6.
2. WILLHI WH1436A Temperature Controller 110V Digital Thermostat Switch Sous Vide Controller NTC 10K Sensor Improved Version
Feature
WE'VE IMPROVED THE CONTROLLER: simplified operation, larger power, wider control range, standard U.S. outlet, enhanced waterproof sensor probe. Get the new version right now.KEEP TEMP IN DESIRED RANGE: Turn on your device at a set degree and turn it off at another set degree. The difference of the 2 degrees can be minimum 0.1 and maximum 288.
HEATING OR REFRIGERATION WORKING MODE: Switch between heating mode and refrigeration mode according to the device you plug into the controller .
MAX LOAD: 1100W at 110V. Outlet not compatible with 2 hot lines 220V plug (Celsius or Fahrenheit Read-out).
WIDE RANGE OF USES: seedling heat mat, home brewing, aquarium, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, etc .
Description
The WH1436 temperature controller can turn on/off an electric appliances at desired temperature.For example, you can use the controller to turn on a heater at 99.9 F and turn it off at 100 F. Or turn on a freeze at 52 F and turn it off at 45.3 F.
(Please be noted that the controller itself doesn't change temp. You need to use heater or refrigeration equipment with it.)
Main features:
1-YEAR WARRANTY: From the date of purchase.
Plug and play. No worry about wiring.
Maximum load: 880W @110V or 1960W @240V.
Heating OR refrigeration working mode.
Celsius or fahrenheit read-out.
Temperature calibration.
Compressor delay protection time setting.
High and low temperature alarms are available(This is a useful function. You can use this feature to alarm you when the temperature overshoots your desired temperature)
Auto shut off timer(It doesn't turn off the controller itself. The timer just turns off the load when specified minutes counts down to 0.)
Specification:
1.Power supply: AC 110V 50/60Hz
2.Measure range: -58 ~ 230 F(-50 ~ 110 C)
3.Temperature resolution: 0.1
4.Accuracy: 0.5
5.Working mode: Heating OR Cooling mode
6.Slew range of temp controlling: 0.1 - 230(difference between turn-on degree and turn-off degree)
7.Control resolution: 0.1
8.Power consumption: less than 3W
9.Relay contact capacity: 10A
10.Store setting after power off: YES
11.Compressor delay protection: YES
12.High and Low Temperature alarm: Yes
13.Product size: 4.9x3.6x1.8 inch (12.5x9.1x4.5 cm)
14.Sensor Cable length: 3m(9.8ft)
Advanced function:
1.Switch temperature unit(Default: F): F or C
2.Switch resolution(Default:0.1): 0.1 or 1
3.Auto shut off timer(Default:OFF)
Package Content:
1x WH1436A Temperature controller
1x sensor cable
3. Nashone Wireless Temperature Controller,Electric Thermostat with Remote Control Built in Temp Sensor 3 Prong Plug LCD Display Heating Cooling Mode(wirelss thermostat)
Feature
REMOTE CONTROL.ON and OFF just need to click button. Control distance reach 40 meters with the sensor in open area and certified by FCCSMART TEMPERATURE MEASUREMENT. Built-in temperature sensor, ambient temperature detected automatically by remote controller, appliance stop to heat or cool after current temperature equal target temperature
MULTIPLE SAFETY PROTECTION.3-Prong socket with grounded terminal, recoverable overload short circuit and Max load current up to 15A.Supply security alarms in unattended operation
EASY TO READ AND INSTALL. Accurate reading for LCD display with back light. Wall mounted or table stand, user-friendly installation
WHAT YOU WILL GET.Wireless thermostat outlet, remote control, user manual, 18 month warranty for quality-related issues and 45 days money back guarantee
Description
How To UseStep 1: Insert 2pcs AAA batteries into the remote controller
Step 2: Ambient temperature detected by remote automatically (current temperature)
Step 3:
Select heating or cooling mode
Click ON or OFF button, Heating symbol or Cooling symbol will flashing about 10 seconds and then heating or cooling mode selected successfully
Step 4:
Switch /
Press +/ON and -/OFF button together at the same time, then switch from to or from to
Step 5: Switch in AC power outlet and plug your appliance into thermostat outlet, red LED indicator will blink, current temp signal from remote controller will be received after LED indicator stop to blink
Step 6: Preset your target temperature in remote controller,then target temp signal transmitted to thermostat outlet
Step 7: Current temperature reach target temperature, then thermostat outlet disconnect from AC power automatically and appliance stop to heat or cool, constant temperature maintained in your room
Spec
Max Rating: 120V/15A/60Hz/1800W
Transmission Frequency: 433.92MHz
Max. Range: 40m in Open Area
Current Temp. Range: 0C~60C/32F~140F
Target Temp. Range: 0C~60C/32F~140F
Tolerance: 1C or 1F
Remote Control Power: 2pcs * AAA 1.5V Batteries
Note
1.The thermostat is intended for indoor use only
2.Actual use shows that heating effect is better than cooling effect
3.Reinstall batteries to change heating or cooling mode
4.To get better effect of constant temperature, please place remote controller and thermostat outlet in the same room or different rooms which have similar ambient temperature
5.Remote control distance varies according to obstacle such as wall thickness
What's In The Box
1*Wireless Thermostat Outlet
1*Remote Control
1*User Manual
4. Hydrofarm Germination, Reptiles and Brewing Jump Start MTPRTC Digital Controller Thermostat for Heat Mats, Seed Ge, 9-by-19-1/2-Inch
Feature
The only safety ETL certified thermostat on the marketProvides constant optimal temperatures for germination/rooting
Ideal in homebrewing for maintaining desired fermentation temperature, and perfect for temperature control in reptile terrariums and small pet enclosures.
LED heating indicator light and Digital temperature control
Controllable range of 68F - 108F, Choice of Celsius or Fahrenheit readout (press Up or Down button to change)
1 Year Warranty
Description
"Hydrofarm's Jump Start Heat Mat Thermostat controls the temperature of heat mats by providing constant optimum temperature for plants, seedlings and cuttings. It is ideal for maintaing root zone/rooting temperatures in a tray and dome. Easy plug-in operation with LED indicator light, digital temperature selection, and three-prong ground plug. Controllable range from 68 to 108 degrees Fahrenheit. Includes temperature probe with 6' cord. Choice of Fahrenheit or Celsius digital readout. Heat mats are not just for gardening anymore! They are very useful for providing consistent, controllable heating for other hobbies including reptile and arachnid keeping (heating for enclosures and terrariums), homebrewing (maintaining of fermentation temperatures), and more. With this thermostat, you can easily expand any heat mat's functionality so that it provides the precise level of warmth your pets and projects require to flourish. The ability to dial in and maintain your preferred temperature means you can rest assured and no longer need to constantly monitor temperature, whether in colder or warmer environments. The Heat Mat Thermostat is the only ETL-certified heat mat thermostat on the market. ETL (Intertek) is a respected inspection laboratory which specializes in product safety testing. ETL certification is proof that a product complies with widely-accepted safety standards. The Jump Start Heat Mat Thermostat is compatible with all heat mats, and is an optional accessory for Hydrofarm Seedling Heat Mats. "5. Inkbird Digital Temperature Controller Thermostat & Timer Time Switch AC 100~240V,1200W Only Heating for Breeding, Planting ect. NO COOLING CONTROL
Feature
NO COOLING CONTROL.There is only heating relay. It can be widely use in over-heat protection and automatic temperature control system of all sorts of electrical equipment for aquarium, pets breeding, hatching, fungus fermenting, and seed germination accelerating, etc. Only one relay and it extends two plugs which both are heating plugs, NO cooling plug.It can be set to two different temperatures with its function of dual time cycle setting during 24 hours according to the day and night, which can more suitable for the physiological needs of animals and plants.
This plug and play product is designed with dual LCD display, and offers the optional display of Centigrade or Fahrenheit, which makes it more humanized temperature control. With large power output 1,200W, it's suitable for most applications.
The temperature can be controlled more accurately with its function of temperature calibration and temperature hysteresis.
There is only heating relay. It can be widely use in over-heat protection and automatic temperature control system of all sorts of electrical equipment for aquarium, pets breeding, hatching, fungus fermenting, and seed germination accelerating, etc.
Description
Features:Temperature Control Range: -50~99 C / -58~210 F
Temperature Resolution: 0.1 C / 0.1 F
Temperature Accuracy: 1C (-50 ~ 70C) / 1F (-58 ~ 160 F)
Temperature Control Mode: On/Off Control, Heating, No cooling control
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Relay Contact Capacity: Heating (10A, 100-240VAC)
Sensor Type: NTC sensor (Including)
Ambient Temperature: -30~ 75 C / -22~ 167 F
Storage
Temperature:-20~ 60 C / -4~ 140 F
Humidity:20~85% (No Condensate)
Dimension
Body:140x68x33mm (5.5x2.7x1.3 inch.)
Socket:85x42x24mm (3.3x1.7x1 inch.)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 25cm (1ft)
NET Weight: About 0.35kg (0.77lb)
Temperature calibration
Over-temperature and sensor fault alarm
Warranty: 1 Year
Package Content:
1x Temperature controller ITC-306T
1x Manual
6. bayite Temperature Controller 1650W BTC211 Digital Outlet Thermostat, Pre-wired, 2 Stage Heating and Cooling Mode, 110V - 240V 15A
Feature
Manual has been updated for easier comprehension. This controller uses independent heating and cooling toggling points to keep your environment in the ideal temperature rangeControls both a heating and cooling/refrigeration device at the same time. This controller can also be used to easily control a single heating or cooling device
Waterproof sensor, high/low temperature alarm, and automatic power-on delay to protect compressors
MAX LOAD: 1650W at 110V or 3300W at 220V. (Celsius or Fahrenheit Read-out)
WIDE RANGE OF USES: seedling heat mat, home brewing, aquarium, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, etc
Description
The BTC211 (BTC200 Series) temperature controller can turn on/off an electric appliances at desired temperature.And the operation has been simplified for ease of use.
For example, you can use the controller to turn on/off a heater and a fridge to keep temp around 100 F. Turn on heater at 98.5 F. Turn on fridge at 105 F. Turn off the heater/fridge when temp reaches 100 F. The setting is (SV=100, Cd=5, Hd=1.5). Please note that the controller itself doesn't change temp.
Main features:
1-YEAR Warranty
Plug and play. No worry about wiring.
Maximum load: 1650W @110V or 3300W @220V(Not compatible with the 2 hot line 220V)
On/Off Control, Heating and Cooling
Celsius or fahrenheit read-out.
Temperature calibration.
Compressor delay protection time setting.
High and low temperature alarms are available(This is a useful function. You can use this feature to alarm you when the temperature overshoots your desired temperature)
Specification:
1.Power supply: AC 110V ~ 240V, 50/60Hz
2.Measure range: -58F ~ 230F / -50C ~ 110C
3.Temperature resolution: 0.1
4.Accuracy: 0.5
5.Working mode: Heating and Cooling mode
6.Max span between turn-on degree and turn-off degree is 25
7.Control resolution: 0.1
8.Power consumption: less than 3W
9.Relay contact capacity: 15A
10.Store setting after power off: YES
11.Compressor delay protection: YES
12.High and Low Temperature alarm: Yes
13.Product size: 4.9x4.5x1.9 inch (12.5x11.5x5 cm)
14.Sensor Cable length: 3m(9.8ft)
Advanced function:
1.Switch temperature unit(Default: F): F or C
2.Switch resolution(Default:0.1): 0.1 or 1
Package Content:
1x BTC211 Temperature controller
1x sensor cable
1x power cord (0.97m/3.2ft)
7. bayite Temperature Controller BTC201 Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode, 110V - 240V 10A
Feature
Manual has been updated for easier comprehension. This controller uses independent heating and cooling toggling points to keep your environment in the ideal temperature rangeControls both a heating and cooling/refrigeration device at the same time. This controller can also be used to easily control a single heating or cooling device
Waterproof sensor, high/low temperature alarm, and automatic power-on delay to protect compressors
MAX LOAD: 1100W at 110V. Celsius or Fahrenheit Read-out
WIDE RANGE OF USES: seedling heat mat, home brewing, beer brewing, aquarium heater, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, heat mat, etc
Description
The BTC201 temperature controller can turn on/off an electric appliances at desired temp.For example, you can use the controller to turn on/off a heater and a fridge to keep temp around 100 F. Turn on heater at 98.5 F. Turn on fridge at 105 F. Turn off the heater/fridge when temp reaches 100 F. The setting is (SV=100, Cd=5, Hd=1.5). the controller itself doesn't change temp.
Main features:
1-YEAR Warranty
Plug and play.
Maximum load: 1100W @110V or 2200W @220V(Not compatible with the 2 hot line 220V plug).
On/Off Control, Heating and Cooling
Celsius or fahrenheit read-out.
Temperature calibration.
Compressor delay protection time setting.
High and low temperature alarms are available(You can use this feature to alarm you when the temperature overshoots your desired temperature)
Specification:
1.Power supply: AC 110V - 240V 50/60Hz
2.Measure range: -58F ~ 230F / -50C ~ 110C
3.Temperature resolution: 0.1
4.Accuracy: 0.5
5.Working mode: Heating and Cooling mode
6.Max span between turn-on degree and turn-off degree is 25
7.Control resolution: 0.1
8.Power consumption: less than 3W
9.Relay contact capacity: 10A
10.Store setting after power off: YES
11.Compressor delay protection: YES
12.High and Low Temperature alarm: Yes
13.Product size: 4.9x4.5x1.9 inch (12.5x11.5x5 cm)
14.Sensor Cable length: 3m(9.8ft)
Advanced function:
1.Switch temperature unit(Default: F): F or C
2.Switch resolution(Default:0.1): 0.1 or 1
Package Content:
1x BTC201 Temperature controller
1x sensor cable
1m/3.3ft power cord
8. Inkbird C206T 1500W Heat Mat Temperature Controller, Day and Night Thermostat, 6.56FT NTC Sensor, F and C Degree, -58-212F
Feature
[Setting Independently] Inkbird C206T lets you to control your desired environment temperature. You can set the day and night temperature independently to connect your heat equipment, then set the temperature that you want to maintain.[Accuracy Temperature] The heat thermostat is with 6.56ft precise temperature sensor and its adjustable set points temperature control from -58 to 212F with an accuracy of 1F.
[Three Display Window] Be able to display 3 different details such as the current temperature, the setting temperature and the current time.
[Waterproof Probe] The NTC stainless probe is waterproof, IP68 Grade. Its diameter is 1.57"x 0.2".
[Safe & Warranty] 12 months Warranty! Please be sure to use within 13.5A 1500W.
Description
C206T is a heating output temperature controller (No Cooling Controller) with day and night temp control for breeding and planting, etc.With its plug-n-play design, it can easily controls the temperature of your heat device, providing constant optimum temperature for the physiological needs of animals and plants.
C206T can be widely used in over-heat protection and automatic temperature control system of all sorts of electrical equipment for aquarium, pets breeding, hatching, fungus fermenting, and seed germination accelerating, etc.
Specification:
Input: 100~265VAC 50/60HZ
Temperature Control Range: -50~100C / -58~212F
Heat Differential Value: 0.3~15C / 1~30F
Temperature Calibration: -9.9~9.9C / -15~15F
Ambient Temperature: -30~75 C (-22~167F)
Dimension: ( 3.66(L)*2.48(W)*1.34(H) in )
Package Included:
1 x 13.5A Temperature Controller C206T
1 x 6.56FT Sensor
1 x Manual
9. DIGITEN Digital Thermostat Outlet Controller Switch Simple-Stage Plug LCD Temperature Control Heating or Cooling
Feature
Large LCD screen, glare free and eye protected, plug and play design, standard U.S. outlet, can be used for heating mode or refrigeration modeThe temperature sensor is made of silicone, is waterproof with high quality, high-accuracy
Easy to use and program; Only 2-step settings for your application, and plug and play design.
Support reading with Centigrade or Fahrenheit unit
Wide uses: wine/beer brewing, aquarium, green house, seedling heat mat, BBQ, Boiler operating control, BBQ, etc .
Description
Features:Large LCD screen, glare free and eye protected;
Support reading with Centigrade or Fahrenheit unit;
Easy to use and program; Only 2-step settings for your application, and plug and play design;
With a temperature correction function. Max current: 10A;
Max output load: 1100W@110V, 2200W@220V;
High and low temperature alarms are available;
Over-temperature and sensor fault alarm;
Specifications:
Power Supply: 100-240VAC 50/60HZ
Temperature Control Range: -40~120, -40~248
Temperature Control Mode: Heating or Cooling
Temperature Resolution: 0.1, 0.1
Temperature Accuracy: 1, 1
Buzzer Alarm: High and Low Temperature Alarm
Input sensor: NTC Waterproof, sensor length:Approx 2m(6 fts)
Input Power Cable Length:150cm (5ft)
Output Power Cable Length: 18cm (7inches)
Controller Dimension: 137*65*28mm
Packaging include:
1 x DTC101 Temperature Controller
1 x NTC sensor
1 x Manual
10. iPower 40-108F Digital Heat Mat Thermostat Controller for Seed Germination, Reptiles and Brewing
Feature
PROFESSIONAL RELIABILITY: Digital temperature controller for heat mat in colder or warmer environmentsVARIETY OF USES: Heat mat thermostat provides constant customized temp for Seed Germination, Rooting, Reptiles, Homebrewing and Fermentation, keeping your various environments in their ideal temperature range
TEMPERATURE RANGE:Digital thermostat provides temperature control between 40F - 108F (5-42C). Temperature Display Range: 32 -140F. Choice of Celsius or Fahrenheit readout
TECHNICAL SPECIFICATIONS: 120 Volts / 8.3 Max Amps /60 HZ / 1000 Watts. Easy plug-in operation with LED illuminated indicator lights & three-prong grounded plug
QUALITY GUARANTEE:1 Year Manufacturer Warranty
Description
The iPower heat mat thermostat provides constant customized temp seed germination, reptiles and brewing. It is ideal for maintain rooting temperature in a tray and dome. Ideal in homebrewing for maintaining desired fermentation temperature, and perfect for temperature control in reptile terrariums and small pet enclosures.
This heat mat controller is compatible with all heat mats, but is optimized for iPower seedling heat mats.
Features
- Controls temperature in colder or warmer environments
- Digital temperature controller for heat mat
- Provides constant optimum temperature for specific crops
- Digital thermostat provides temperature control between 40F-108F (5-42C), temperature display range: 32 -140F
- Celsius or Fahrenheit read-out
- Specs: 120 Volts / 8 Max Amps / 60 HZ / 1000 Watts
- Easy plug-in operation with LED illuminated indicator lights & three-prong ground plug
- ETL certification is proof that a product complies with widely-accepted safety standards
- 1 Year Manufacturer Warranty
Seeding Heat Mat Setup Instructions
- Place sensor into the rooting area about 1"- 1-1/2"
- Position thermostat up and away from seedling trays and stray water. Do not submerge
- Plug heat mat into thermostat
- Plug in thermostat power cord and set maximum desired temperature
Heat mat thermostat can also be used to control the temperature of many other appliances as long as they don't exceed the maximum electrical specifications stated above. Simply place the sensors in the area where the temperature needs to be controlled plug the appliance into thermostat, and set the desired temperature.
Abnormal Warning
- if thermostat shows "E1", it means that the actual temperature is lower than 0 degree Celsius or 32.0 degrees Fahrenheit
- if thermostat shows "E2", it means that the actual temperature is higher than 60.0 degrees Celsius or 108.0 degrees Fahrenheit
- if thermostat shows "E3", it means that the temperature sensor is not working properly. Please re-install the sensor
About iPower
- iPower is one of the leading professional hydroponics suppliers over a decade.
- Our goal is to put our best products in every home & garden where needed.
- We only provide the premium quality components and reliable service.
Recent Comments