Which are the best spindle motor available in 2019?
We spent many hours on research to finding spindle motor, reading product features, product specifications for this guide. For those of you who wish to the best spindle motor, you should not miss this article. spindle motor coming in a variety of types but also different price range. The following is the top 10 spindle motor by our suggestions:
Best spindle motor
1. Konmison 1Set Mini CNC Lathe Air Cooled 500W Spindle Motor CNC 0.5KW with 52mm Clamps and 110V Mach3 Power Converter Spindle + 13pcs ER11
Feature
Air Cooled Spindle - 110VAC MACH3 - Analog Input; Torque: 5000G/CMHigh precision spindle run out 0.01-0.03; Speed: Up to idle up to 11000 rev / min
Operating voltage: 100VDC; Power: 500W; Spindle diameter: 52mm
Applied to Lathes, Mills, Car Hoists, Pumps and Conveyors, etc.
Stiving for 100% service satisfactory. Any issue please contact us, we would always try our best to help you.
Description
CNC 500W Air Cooled Spindle Kit for DIY Engraving
Package Included:
1 x 500W Air-Cooled Spindle Motor
1 x 110V Speed Governor with MACH3
1 x 52mm Mount Bracket
13 x ER11 collect
4 x Screws
Features:
Input: AC110V10%50/60Hz
Operating voltage: 100VDC
Power: 500W
Current: 4A
Speed: up to idle up to 11000 rev / min
Torque: 5000G/CM
Insulation resistance: > 2 megohms
Dielectric strength: 400V
Spindle diameter: 52mm
Chuck portion length: 45mm
Chuck portion diameter: 16mm
Motor length: 200mm
High precision spindle runout 0.01-0.03
Power supply Specification: (and this spindle supporting the use of the)
13pcs ER11 collet set gripping range: 1MM to 7MM
(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm); Run-out tolerance 0.01mm (0.0006")
Note:
1. The mounting bracket is NOT threaded. You will need to bolt this to a threaded object for it to hold. The bracket has only clearance holes.
2. Suitable for light carving(wood or light aluminum) operations, NOT for high density aluminum or steel.
2. Square 2.2KW/2200W Quality Air-cooled Spindle Motor ER20 24000rpm 220V/AC 6A 400Hz CNC Engraving Router Milling Grinding Cutting Machines Suitable For Medium Or Large Processing
Feature
4PC Ceramic bearing,Runout off less than 0.01mmtapered bore: less than 0.005mm, If you want looking for Inverter (VFD) for this motor, we suggest use: https://www.amazon.com/dp/B076WYN9V8
Wiring:The spindle's terminal U1 connect Inverter's U,spindle's terminal V1 connect Inverter's V,spindle's terminal W1 connect Inverter's W,the inverter's terminal R ,S , T any 2 pins connect 220VAC
4pcs Bearings from Germany High Quality Ceramic bearing Bearings, 4 bearings(C7005x2 + C7002x2),P4 class
Main application:Wood, Aluminum, Stone, metal, glass, PVC industry
Description
Package include:1 x 2.2Kw Square ER20 Air-cooled spindle motor (220V,24000rpm,4 bearing,400Hz)
Specification:
Material: Stainless Steel
Power: 2.2Kw
Voltage: 220V/AC
Current: 6A
Frequency: 400Hz
Speed: 24000rpm
Cooling: Air-cooled
Runout off: Less than 0.01mm
Precision tapered bore: less than 0.005mm
Bearing Lubrication: Grease
Collet size: ER20
Bearings: 4pcs Ceramic bearing,P4 class
Power supply interface:connector Wiring:The spindle's terminal"U1"connect Inverter's"U"spindle's terminal"V1"connect Inverter's"V"spindle's terminal "W1" connect Inverter's "W"the inverter's"R","S", "T"any "2" terminal connection "220VAC"
Main application:
Wood, Aluminum, Stone, metal, glass, PVC industry
If you want looking for Inverter (VFD) for this motor, we suggest use: https://www.amazon.com/dp/B076WYN9V8
3. MYSWEETY CNC Spindle Motor Kits, 2.2KW Water Cooled Spindle Motor 2.2KW Inverter + 80MM Clamp Mount +13PCS ER20 Collet + 5M Water Pipe + Water Pump for CNC Router
Feature
Package include: 1 x 2.2KW Spindle Motor, 1 x 2.2KW VFD, 1 x 75W Water Pump, 1 x 5M Water Pipes, 1 x 80mm Spindle, 13 x ER20 Collet, 1 x 70mm Brush, 10 x Drill Bits.Runout off: less than 0.001mm, voltage: 220V, Speed:0-24000rpm, AC Inverters, Frequency of Inverter: 0-400Hz.
The spindle motor applied to Lathes, Mills, Car Hoists, Pumps & Conveyors, etc.
13PCS ER20 Collet Set Gripping Range:(1mm,2mm,3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm,13mm).
100% satisfactory, if you have any problem, please contact us, we will help your money back.
Description
1.Spindle Motor:Size: 80mm
Power: 2200W
Voltage: 220V
Frequency: 0-400Hz
Speed: 0-24000rpm
Water Cooling ER11 collet
Runout off: less than 0.001mm
Germany SKS 4pcs bearing
Bearing type: 2 x 7005C P4 DT & 2 x 7002C P4 DT
Grease Lubrication
Power Interface: Optional GX16 waterproof air plug, there are marked 1234, 123 were
connected to the inverter power supply (U, V, W), 4 connected inverter ground
2.Inverter:
Type: 2.2KW/220V
Input: 220VAC/50Hz
Output: 0-220VAC 3-phase
Frequency: 0-400Hz
Size: 168x124x161mm
3.ER20 Collet Set:
Gripping Range: 1MM to 13MM (1mm, 2mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm)
Run-out tolerance 0.01mm (0.0006")
4.Water Pump:
Voltage: 220V
Structure: Single-stage Pump
Pressure: High Pressure
Application: Submersible
Usage: Water
5.5M Water Pipes:
Length: 5M
Can be connected between Water Pump and Spindle Motor
6.Spindle Motor Clamp Mount:
Diameter: 80mm
Material: Aluminum,Surface sandblasted
Application: Wood working industry rourter, such as wood door milling engraving and cutting, furniture producing
Package include:
1 x 2.2KW Spindle Motor
1 x 2.2KW VFD
1 x 75W Water Pump
1 x 5M Water Pipes
1 x 80mm Spindle Clamp (Free 3pcs screws)
13 x ER20 Collet (1mm, 2mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm)
1 x 70mm Brush
10 x Drill Bits
How to connect:
The package come with two Aviation plugs, just put the little one into the spindle, then use the large one to fix into the little one, you will see the marked number (1.2.3.4) on the top of large one, Pin 1 goes to terminal U on the vfd. Pin 2 goes to terminal V on the vfd. Pin 3 goes to terminal W on the vfd. Pin 4 is a ground/common.
4. 400W CNC DC Air Cooled Spindle Motor ER8 NVBDL+ 12000rpm Brushless Spindle Motor kit + 600w Brushless Motor Driver Without Hall LCD Panel + 55mm Mount Bracket For small and medium-sized processing
Feature
We design Brushless spindle driver NVBDL+ specialized for the ecomomic engraving machine,it matchs with the brushless DC motor.With the updated DSP technology,the driver can drive the motor to output more precise speed and bigger torque comparing with current drivers.We adopt the idea from the inverter, designed independent demountable panel.The users can take down the panel from the main driver and install it on the controller cabinet.By the panel,we can set the parameter,control motor speed and start/stop,very convenient.
1) Note: pls see clearly,this Spindle motor output shaft with ER8 collet,and output shaft is complete shaft,can't exchange to ER11,ER16 or other any type chuck shaft 2)Power: 400W, 3) Input Voltage: 48V ,4) Rotating speed: 12000 R/Min, 5) Torque: 0.45 N.m ,6) Insulation resistance: > 2ohms, 7) Dielectric strength: 400V, 8) Size: 55mm diameter
1) High performance, low prices, 2) DSP main control module, 3) No current passing when no movement, 4) Voltage range 24VDC-60VDC, 5) Demountable panel, 6) Maximum driver power 600W, 7) 3 debugging ways: Panel potentiometer, external voltage signal, external PWM Signal
NVBDL + without Hall feedback, & when you order agter,pls let me know your email ID,the English user manual will send by email &
Description
Package include:1 x 600w Brushless motor driver without hall
1 x 400w Brushless spindle motor ER8 without hall
1 x 55mm Spindle Motor mount bracket clamp
when you order after, pls let me know your email ID,the English user manual will send by email.
Note: pls see clearly,this Spindle motor output shaft with ER8 collet,and output shaft is complete shaft,can't exchange to ER11,ER16 or other any type chuck shaft
Products brief introduction
This brushless driver is without hall.It can be used to engrave metal or non-metal and other materials.
Specification feature
brushless driver is without hall:
1) High performance, low prices
2) DSP main control module
3) No current passing when no movement
4) Voltage range 24VDC-60VDC
5) Demountable panel
6) Maximum driver power 600W
7) 3 debugging ways: Panel potentiometer, external voltage signal, external PWM Signal
8) Maximum driver motor running speed 12000R/Min.
9) Speed testing port for user to inspect the real speed.
10) Internal over-voltage, over-current and stalling inspection
11) Input signal TTL compatible
Brushless spindle motor
1) Power: 400W
2) Input Voltage: 48V
3) Rotating speed: 12000 R/Min
4) Collet: ER8
5)Torque: 0.45 N.m
6) Insulation resistance: > 2ohms
7) Dielectric strength: 400V
8) Diameter: 55mm
9) Chuck portion length: Arbor parts 35mm, (including the nut and sandwich 43mm)10) Part chuck diameter: 16mm
11) Total motor length: 172mm (comprising gripping parts and motor)
12) Size: 55mm diameter 13) Spindle Weight: 1.1KG
14) Spindle runout off: about 0.01-0.03mm.
15) Mount: Product outline dimension is 118*76*33mm,The two installing holes size is 110mm
User manual link: https://drive.google.com/file/d/1ayNCr25l_ZhJ5zeEHPct9DGB3XCdCjI4/view?usp=sharing, pls dowbload all files
5. MYSWEETY 1Set DIY 110V 2200W Water Cooled Spindle Motor CNC Spindle Motor 80MM 2.2KW + 13pcs ER20 Collet + 80MM Clamp + Converter + 5M Water Pipe + 110v Water Pump+ 70mm Brush + Drill Bits
Feature
Package include: 1 x 110V 2.2KW Spindle Motor+1 x 110V 2.2KW VFD+1 x 110V 75W Water Pump+1 x 5M Water Pipes+1 x 80mm Spindle Clamp+13 x ER20 Collet+ 1 x 70mm Brush+10 x Drill Bits.Runout off: less than 0.005mm, Speed:0-24000rpm, AC Inverters, Frequency of Inverter: 0-400Hz
13PCS ER20 Collet Set Gripping Range:(1mm,2mm,3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm,13mm)
The spindle motor applied to Lathes, Mills, Car Hoists, Pumps & Conveyors, etc.
100% satisfactory, if you have any problem, please contact us, we will help your money back.
Description
1.Spindle Motor:
Size: 80mm
Power: 2200W
Voltage: 110V
Frequency: 0-400Hz
Speed: 0-24000rpm
Water Cooling ER20 collet
Runout off: less than 0.001mm
Germany SKS 4pcs bearing
Bearing type: 2 x 7005C P4 DT & 2 x 7002C P4 DT
Grease Lubrication
Power Interface: Optional GX16 waterproof air plug, there are marked 1234, 123 were connected to the inverter power supply (U, V, W), 4 connected inverter ground
2.Inverter:
Type: 2.2KW/110V
Input: 110VAC/50Hz
Output: 0-220VAC 3-phase
Frequency: 0-400Hz
Size: 168x124x161mm
3.ER20 Collet Set:
Gripping Range: 1MM to 13MM (1mm, 2mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm)
Run-out tolerance 0.01mm (0.0006")
4.Water Pump:
Voltage: 110V
Structure: Single-stage Pump
Pressure: High Pressure
Application: Submersible
Usage: Water
5.5M Water Pipes:
Length: 5M
Can be connected between Water Pump and Spindle Motor
6.Spindle Motor Clamp Mount:
Diameter: 80mm
Material: Aluminum,Surface sandblasted
Application: Wood working industry rourter, such as wood door milling engraving and cutting, furniture producing
Package include:
1 x 110V 2.2KW Spindle Motor
1 x 110V 2.2KW VFD
1 x 110V 75W Water Pump
1 x 5M Water Pipes
1 x 80mm Spindle Clamp (Free 3pcs screws)
13 x ER20 Collet (1mm, 2mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm)
1 x 70mm Brush
10 x Drill Bits
How to connect:
The package come with two Aviation plugs, just put the little one into the spindle, then use the large one to fix into the little one, you will see the marked number (1.2.3.4) on the top of large one, Pin 1 goes to terminal U on the vfd. Pin 2 goes to terminal V on the vfd. Pin 3 goes to terminal W on the vfd. Pin 4 is a ground/common.
6. CNC Spindle 500W Air Cooled 0.5kw Milling Motor and Spindle Speed Power Converter and 52mm Clamp and 13pcs ER11 Collet for DIY Engraving
Feature
BLACK FRIDAY PRICE: $ 115.98!!! ORIGINAL PRICE: $ 399.99, 3 DAYS PROMOTIONOperating voltage: 100VDC, Power: 500W, Input: AC110V, Speed: Up to idle up to 12,000 rev / min, Torque: 5000G/CM.Insulation resistance:> 2 megohms, Dielectric strength: 400V.
Diameter: 52mm, Chuck portion length: 45MM, Chuck portion diameter: 16mm.
Motor Length: 200MM, High precision spindle run out 0.01-0.03
100% service satisfactory, If you have any questions, please contact us
Description
BLACK FRIDAY PRICE: $ 115.98!!! ORIGINAL PRICE: $ 399.99, 3 DAYS PROMOTION500W Spindle Motor + 110V Speed Governor with MACH3 + Mount bracket + 13PCS ER11 collect + 4 Screws
Feature:
Input: AC110V 10%50/60Hz
Operating voltage: 100VDC
Power: 500W
Current: 4A
Speed: Up to idle up to 12,000 rev / min
Torque: 5000G/CM
Insulation resistance:> 2 megohms
Dielectric strength: 400V
Diameter: 52mm
Chuck portion length: 45MM
Chuck portion diameter: 16mm
Motor Length: 200MM
High precision spindle runout 0.01-0.03
Power supply Specification: (and this spindle supporting the use of the)
13Pcs ER11 Collet Set Gripping Range: 1MM to 7MM
(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm), Run-out tolerance 0.01mm (0.0006")
Package including:
1 x 500W Air-Cooled Spindle Motor
1 x 110V Speed Governor with MACH3
1 x 52mm Mount bracket
13 x ER11 collect
4 x Screws(free)
7. VFD 220V 1.5KW 2hp Variable Frequency Drive CNC Motor Inverter Converter for Spindle Speed Control HUANYANG HY-Series(1.5KW, 220V)
Feature
IMPORTANT NOTE: this VFD is ONLY applicable to three phase asynchronous motor and NOT support external resistor.Fan runs all the time even though the motor isn't.the unit output is 400hz when you receive it ,you need to change the parameter to match your motor (if your motor is other hz)This drive is very suitable for HIGH-SPEED ROTATION motors,such as spindle motor, engraving machine CNC.The input is 220v 1 or 3phase.You can just connected L1/L2 to any two of VFD input R/S/T
This VFD can be used for constant torque loads (such as hard starting: Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc). It can be used as a motor speed control and a phase converter.This item use Sine wave PWN(SPWM) for the control system.work well with the Mach 3 controller
Application: Spindle motor.CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines
If there are problems in use after you receive,please don't give us negative or natural feedback.Please contact us as soon as possible, we will help you solve problems or help you replace new one .
Description
critical video link https://youtu.be/XVvDsdHq1OQIMPORTANT NOTEthe drive is ONLY applicable to THREE PHASE ASYNCHRONOUS motor,please confirm your motor is three-phase asynchronous motor before purchase.To protect VFD, when you stop using it,please be sure to press the red button "stop" and power off
specification
power:1.5KW
horsepower:2HP
Input voltagesingle-phase or three-phase 220V + -15% 50Hz / 60Hz
Output voltage: 220V three-phase
Output frequency: 0-50Hz / 0-400Hz
Input Frequency: 47-63Hz
Output Current: 7A
Feature
PID control; advanced calculus PID closed-loop arithmetic, quick responding speed and high suitability
Easy PLC function can realize 16 legs of speed and inverter control function
RS485 communication port, adopting standard international MODBUS main circuit control
CWith extremely strong anti-jamming capability
Low output ratting torque0.5HZ-150%, low speed running ability
Carrier adjustable by 16KHZ, completely soundless working environment
Broad voltage working area, normal running in 304V-456V
Auto voltage regulation (AVR) technique, for ensuring the inverter load capability
Various control technique by both synchronization and non-synchronization, dynamically realize fast starting without changing brakes
With perfect error protection and short circuit starting protection capability
parameter setting video for HY vfd https://youtu.be/2VXMxxa6lXM
8. MYSWEETY CNC Machine, DIY CNC Router Kits 1610 GRBL Control Wood Carving Milling Engraving Machine (Working Area 16x10x4.5cm, 3 Axis, 110V-240V)
Feature
BLACK FRIDAY PRICE: $ 169.99!!! ORIGINAL PRICE: $ 399.99, 3 DAYS PROMOTIONPurchase 1610 milling engraving machine can get free the power supply, add the power supply and 1610 milling engraving machine to cart together before you checkout.Engraving area: 160 x 100 x 45mm; Software: GRBL control systems; Support system: can work on Windows XP, Win7, Win8, Win10. You can buy the laser head on asin: B07334WBC9, B07GR29FZR, B07GR22BL4.
This engraving machine can be engraved plastic, wood, acrylic, pvc, pcb, wood or the like material.
Spindle motor: 775 spindle motor, high-speed (7000 rpm); Stepper motor: 42 Stepper motor.
Simple Assembly: Download the English manual : https://s3.amazonaws.com/1610/1610.zip. If you have any question, please contact us firstly, thanks!
Description
BLACK FRIDAY PRICE: $ 169.99!!! ORIGINAL PRICE: $ 399.99, 3 DAYS PROMOTIONBIG PROMOTION: Purchase 1610 milling engraving machine can get free the power supply, add the power supply and 1610 milling engraving machine to cart together before you checkout.
Description:
Some components and core components have been assembled, simply hand assembled according to the installation instructions, you can use the rack. Plastic body with a profile, small size, light weight, USB interface, GRBL control systems, learn to use the preferred entry.
The following software you can use:
Control Software: GrblController (was included)
Toolpath creation software: Artcam2008 (not included)
PCB processing software: Coppercam (not included)
Parameter:
Frame size: 260x240x220mm
Working area: 160x100x45mm
Mesa: aluminum plate(100x180mm)
Step motor: 3 pieces Two-phase step motor 1.3A 0.25Nm
Spindle: 775 spindle motor (12-36V) 24V: 7000r/ minB
Software: GRBL controller 0.9j
Power supply: 24V 5.6A
Support system: windows xp, win7, win8, linux
Voltage: AC 110V-240V
Package inclued:
1pcs Full set engraving machine
10pcs PCB cutter
4 set plates
(Please contact us for English manual after you purchased)
Notice:
The machine for a full set of spare parts, shall be installed by the buyers.
We suggest cnc-based buyers to buy, this machine is not industrial grade level.
9. Beauty Star 1Set DIY Mini CNC 300w DC Spindle Motor + 52MM Clamp + 110V Power Converter + 13 PCS ER11 Collect
Feature
Air Cooled Spindle; Size: 52mm; Power: 300W; Voltage: 48V DCHigh precision spindle run out 0.01-0.03; Speed: Up to idle up to 10000 rev / min
Maximum Torque: 0.23N.m; Comes with ER11 collect+mount+speed governor.
Applied to Lathes, Mills, Car Hoists, Pumps & Conveyors, etc
Stiving for 100% service satisfactory. Any issue please contact us, we would always try our best to help you.
Description
CNC 300W Air Cooled Spindle Kit for DIY Engraving
Package Included:
1 x 300W Spindle Motor
1 x Speed Governor with Potentinmeter
1 x Mount Bracket
4 x Screws
13 x ER11(1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7mm)
Feature:
Size: 52mm
Power: 300W
Voltage: 48V DC
Speed: Up to idle up to 10000 rev / min
Air Cooling ER11 collet
Maximum Torque: 0.23mN.m
Runout Off: 0.01-0.03mm
Dielectric Strength: 400V
Power Supply speed governor Input: AC1100V 10%50/60Hz
Note:
1. The mounting bracket is NOT threaded. You will need to bolt this to a threaded object for it to hold. The bracket has only clearance holes.
2. Suitable for light carving(wood or light aluminum) operations, NOT for high density aluminum or steel.
10. DEWALT DW660 Cut-Out 5 Amp 30,000 RPM Rotary Tool with 1/8-Inch and 1/4-Inch Collets
Feature
DW660 Includes:1 drywall cutting bit and 1/4", 1/8" colletsTurn-on/bump-off switch allows user to easily shut tool off
5-amp, 30,000 rpm motor provides more cutting power
Slim body design for less fatigue over prolonged use
Dust-sealed switch protects against dust ingestion for longer switch life
120v ac 5.0 amp
Recent Comments